Water vapour effects of cyclic oxidation on Fe-Cr alloys
Fe-Cr alloys (Cr: 9-30 wt%) were subjected to cyclic oxidation in Ar-20%O2, Ar-20%O2-5%H2O and Ar-10%H2-5%H2O (partial pressure of oxygen, pO2 = 1.1 ¥ 10-16atm). Oxidation weight change measurement showed that in general, increasing Cr content reduced the oxidation rate. At Cr < 17%Cr, breakaway...
Main Authors: | N.K. Othman, N.Othman, J. Zhang, D.J. Young |
---|---|
Format: | Article |
Language: | English |
Published: |
Universiti Kebangsaan Malaysia
2010
|
Online Access: | http://journalarticle.ukm.my/7327/ http://journalarticle.ukm.my/7327/ http://journalarticle.ukm.my/7327/1/01_Md_Yeaminhossain.pdf |
Similar Items
-
Studies on initial stage of high temperature oxidation of Fe - 9 to 12% Cr alloys in water vapour environment
by: Kaderi, Akbar, et al.
Published: (2012) -
The effects of water vapor on high temperature oxidation of Fe-Cr-Ni alloy at 1073k
by: Ani, Mohd Hanafi, et al.
Published: (2012) -
The effect of water vapor on high temperature oxidation
of Fe-Cr alloys at 1073K
by: Ani, Mohd Hanafi, et al.
Published: (2009) -
Surface oxygen potential on the oxide scale during high temperature oxidation of Fe-Cr alloys at 1073 K
by: Ani, Mohd Hanafi, et al.
Published: (2011) -
Recent trend on application of high temperature ferritic Fe-Cr alloys in solid oxide fuel cells
by: Ani, Mohd Hanafi, et al.
Published: (2011)