Characterization of a-CNx Thin Films prepared by RF-PECVD Technique for humidity sensor
In this work, amorphous carbon nitride (a-CNx) thin films were deposited by radio frequency (RF) plasma enhanced chemical vapor deposition (RF-PECVD) technique. The RF power and gas mixture of methane (CH4) and nitrogen (N2) flow was kept constant, while the electrode distance was varied from 1 to 6...
Main Authors: | R. Awang, N.F.H Aziz, N. Purhanudin, Z. Zalita |
---|---|
Format: | Article |
Language: | English |
Published: |
Penerbit Universiti Kebangsaan Malaysia
2017
|
Online Access: | http://journalarticle.ukm.my/10723/ http://journalarticle.ukm.my/10723/ http://journalarticle.ukm.my/10723/1/20%20R.%20Awang%20.pdf |
Similar Items
-
Effect of radio frequency power on a-CNx film properties
and its performance as humidity sensors
by: Rozidawati Awang,, et al.
Published: (2018) -
RF magnetron sputtered YSZ thin film: Fabrication and characterizations
by: Meskon, Shahrul Razi, et al.
Published: (2010) -
Effect of temperature on the optical and morphological properties of zinc oxide thin films prepared by RF magnetron sputtering
by: Mohamad, Souad A., et al.
Published: (2015) -
Effect of temperature on the optical and morphological properties of zinc oxide thin films prepared by RF magnetron sputtering
by: Mohamad, Souad A., et al.
Published: (2014) -
Electrical property of ITO thin film deposited by Rf Magnetron Sputtering
by: Sutjipto, Agus Geter Edy, et al.
Published: (2011)