A simulation of controller system for home lighting and temperature devices / Abdul Rahman Mat Jusoh
The main purpose of this project is to build a Simulation of Controller System for Lighting and Temperature Device at home. Printer Parallel port will be modified and use in order to connect the host computer with the prototype circuit. Basically this system can be access locally via host PC a...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Information Technology and Quantitative Sciences
2007
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/633/ http://ir.uitm.edu.my/id/eprint/633/1/PPb_ABDUL%20RAHMAN%20MAT%20JUSOH%20CS%2007_5.pdf |
| Summary: | The main purpose of this project is to build a Simulation of Controller System for
Lighting and Temperature Device at home. Printer Parallel port will be modified and use
in order to connect the host computer with the prototype circuit. Basically this system
can be access locally via host PC and remotely through Internet Users can control their
home lighting and temperature electrical devices remotely as long as there is a line
connection through the mtemet. Users of this controller system will be able to set up
their lighting and air-condition device based on timer. This project used LEDs and
Electronic Fan Kit as a prototype for Ughting and air-conditioner components. The
application and circuit was built in other to complete this project. |
|---|