Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail

This project work reports the design work on up-grading a mold die. A 2 cavities mold was up-graded to 8 cavities. This up-grading will increase the efficiency, time for one cycle, production rate and life time of mold. When the mold is up-graded to 8 cavities it becomes more economical and also wil...

Full description

Bibliographic Details
Main Authors:	Abdul Rahman, Muhammad Fadzli, Ismail, Md Zulkhairi
Format:	Student Project
Language:	English
Published:	Faculty of Mechanical Engineering 2001
Subjects:	Mechanical drawing. Engineering graphics
Online Access:	http://ir.uitm.edu.my/id/eprint/26475/ http://ir.uitm.edu.my/id/eprint/26475/1/PPd_MUHAMMAD%20FADZLI%20ABDUL%20RAHMAN%20EM%2001_5.pdf

id	uitm-26475
recordtype	eprints
spelling	uitm-264752019-11-14T08:34:40Z http://ir.uitm.edu.my/id/eprint/26475/ Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail Abdul Rahman, Muhammad Fadzli Ismail, Md Zulkhairi Mechanical drawing. Engineering graphics This project work reports the design work on up-grading a mold die. A 2 cavities mold was up-graded to 8 cavities. This up-grading will increase the efficiency, time for one cycle, production rate and life time of mold. When the mold is up-graded to 8 cavities it becomes more economical and also will increase the life of the mold die. It is important for production of plastic parts like connector. This mold die has been designed according to standard design practice. The material for this mold must be considered carefully. From the assembly of the die detailed part drawings were made. Machining steps in processes such as E. D. M, WIRE CUT, MILLING, GRINDING are given. To ensure the quality of the mold after up-grading all relevant tests to be carried out are explained. Tests for the mold flow process to check the pressure drop, and the material flow balance inside the mold are suggested. Faculty of Mechanical Engineering 2001 Student Project NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/26475/1/PPd_MUHAMMAD%20FADZLI%20ABDUL%20RAHMAN%20EM%2001_5.pdf Abdul Rahman, Muhammad Fadzli and Ismail, Md Zulkhairi (2001) Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail. [Student Project] (Unpublished)
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Teknologi MARA
building	UiTM Institutional Repository
collection	Online Access
language	English
topic	Mechanical drawing. Engineering graphics
spellingShingle	Mechanical drawing. Engineering graphics Abdul Rahman, Muhammad Fadzli Ismail, Md Zulkhairi Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail
description	This project work reports the design work on up-grading a mold die. A 2 cavities mold was up-graded to 8 cavities. This up-grading will increase the efficiency, time for one cycle, production rate and life time of mold. When the mold is up-graded to 8 cavities it becomes more economical and also will increase the life of the mold die. It is important for production of plastic parts like connector. This mold die has been designed according to standard design practice. The material for this mold must be considered carefully. From the assembly of the die detailed part drawings were made. Machining steps in processes such as E. D. M, WIRE CUT, MILLING, GRINDING are given. To ensure the quality of the mold after up-grading all relevant tests to be carried out are explained. Tests for the mold flow process to check the pressure drop, and the material flow balance inside the mold are suggested.
format	Student Project
author	Abdul Rahman, Muhammad Fadzli Ismail, Md Zulkhairi
author_facet	Abdul Rahman, Muhammad Fadzli Ismail, Md Zulkhairi
author_sort	Abdul Rahman, Muhammad Fadzli
title	Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail
title_short	Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail
title_full	Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail
title_fullStr	Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail
title_full_unstemmed	Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail
title_sort	design of a plastic injection mold (8 cavities) / muhammad fadzli abdul rahman and md zulkhairi ismail
publisher	Faculty of Mechanical Engineering
publishDate	2001
url	http://ir.uitm.edu.my/id/eprint/26475/ http://ir.uitm.edu.my/id/eprint/26475/1/PPd_MUHAMMAD%20FADZLI%20ABDUL%20RAHMAN%20EM%2001_5.pdf
first_indexed	2023-09-18T23:16:53Z
last_indexed	2023-09-18T23:16:53Z
_version_	1777419171930308608

Design of a plastic injection mold (8 cavities) / Muhammad Fadzli Abdul Rahman and Md Zulkhairi Ismail

Similar Items