Preparation of peo-based solid polymer electrolyte for dye sensitized solar cell (DSSC) / Fatiha Najwa Muhammad Sobri
In this project, the PEO-based solid polymer electrolyte was successfully prepared by solution casting method. Polyethylene oxide (PEO) used as host polymer while potassium iodide (KI) as salt. The effect of KI concentration on the ionic conductivity of the electrolyte was investigated. The inter...
Main Author: | Muhammad Sobri, Fatiha Najwa |
---|---|
Format: | Student Project |
Language: | English |
Published: |
Faculty Of Applied Sciences
2017
|
Subjects: | |
Online Access: | http://ir.uitm.edu.my/id/eprint/23760/ http://ir.uitm.edu.my/id/eprint/23760/1/PPb_FATIHA%20NAJWA%20MUHAMMAD%20SOBRI%20AS%20C%2017_5.PDF |
Similar Items
-
Compressive properties of fibre reinforced polymer (FRP) rod filled with aluminium foam / Ummu Raihanah Haji Hashim
by: Hashim, Ummu Raihanah
Published: (2015) -
Removal of Copper (Cu) and Iron (Fe) from contaminated water by using ion exchange resin / Norida Lahazan
by: Lahazan, Norida
Published: (2009) -
Development of carbon nanotubes derived from palm oil as electrode materials for lithium ion battery / Tunku Ishak Al-Irsyad Tunku Kudin
by: Tunku Kudin, Tunku Ishak Al-Irsyad
Published: (2009) -
Investigation of bandgap energies of a single phase Zn(₁₋ₓ)CuₓO nanoparticles / Suraya Ahmad Kamil … [et al.]
by: Ahmad Kamil, Suraya, et al.
Published: (2012) -
Optimization of dc and rf performances using multiple-gated high electron mobility transistor (HEMT) / Mohd Nizam Osman
by: Osman, Mohd Nizam
Published: (2009)