Adhesion of nc lacquer on 3 different sanded surfaces of Kelempayan timber / Radhiah Abd Aziz
This research project was carried out to determine the adhesion lacquer on sanded surface of timber. Kelempayan timber was used for this purpose. 3 types of grit of sand paper had been use. Timber prepared to moisture content 12%. Cross cut test were applied based ASTM D3359 09'2. Result sh...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty Of Applied Sciences
2015
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/22834/ http://ir.uitm.edu.my/id/eprint/22834/1/PPb_RADHIAH%20ABD%20AZIZ%20AS%20C%2015_5.PDF |
| Summary: | This research project was carried out to determine the adhesion lacquer on
sanded surface of timber. Kelempayan timber was used for this purpose. 3
types of grit of sand paper had been use. Timber prepared to moisture
content 12%. Cross cut test were applied based ASTM D3359 09'2. Result
show that 80 grit size gave better result. It is significant different. It can be
concluded rough surface better adhesion. |
|---|