Properties of three layer particleboard from Kelempayan (neolamarckia cadamba) / Mohamad Roshafizi Rashid
Particleboard is a panel product made by compressing small particles of wood while simultaneously bonding them with an adhesive. The objective of the study to investigate the mechanical and physical properties of three layer particleboard from Kelempayan (Neolamarckia cadamba) at different propor...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Applied Sciences
2014
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/22824/ http://ir.uitm.edu.my/id/eprint/22824/1/PPb_MOHAMAD%20ROSHAFIZI%20RASHID%20AS%20C%2014_5.PDF |
| Summary: | Particleboard is a panel product made by compressing small particles of wood while
simultaneously bonding them with an adhesive. The objective of the study to investigate
the mechanical and physical properties of three layer particleboard from Kelempayan
(Neolamarckia cadamba) at different proportion level and properties were evaluated
based on Japanese Industrial Standard. Variables factor were as density (500 kglm3
, 600
kglm3 and 700 kglm3) and resin content of urea formaldehyde (8%, 10% and 12%). The
mechanical and physical properties were presented and analyzed using Software
Package Used for Statistical Analysis (SPSS) to determine the significant different of
variables. The result collected shows that all the variables for mechanical properties
were significant different and the better result was 700 kglm3 of density when using 12%
of resin content. For physical properties, the strength of board decrease since the board
has no water repellent. |
|---|