Performance of wood joint from two selected timber species / Izharrashid Ghazali
Nowadays, there are higher demands for furniture because many new housing units are built. Therefore, the addition of solid wood need to be critical, the way to overcome this is to use wood jointing for furniture. The wood jointing short pieces of lumber has become an increasingly popular method...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Applied Sciences
2016
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/22683/ http://ir.uitm.edu.my/id/eprint/22683/1/PPb_IZHARRASHID%20GHAZALI%20AS%20C%2016_5.PDF |
| Summary: | Nowadays, there are higher demands for furniture because many new housing units
are built. Therefore, the addition of solid wood need to be critical, the way to
overcome this is to use wood jointing for furniture. The wood jointing short pieces
of lumber has become an increasingly popular method of reducing wood waste and
utilizing shorts to realize maximum profit from bending properties of wood joint
from two selected timber species (Endospermum Diadenum and Neolamarckia
cadamba) by using finger joint, scarf joint and butt joint. The objective of this
study is to determine mechanical (bending testing) of wood joints and to evaluate
the effect of different wood species on wood joints properties. All the samples has
been tested by bending properties (modulus of rupture and modulus of elasticity)
conforming to the British Standard (BS EN 408:2010). The result showed that
finger joint has the highest value, followed with scarf joint and the lowest are butt
joint. Endospermum Diadenum performs better than Neolamarckia cadamba in
wood joint but Neolamarckia cadamba is better in solid wood |
|---|