Three-phase AC-DC current injection hybrid resonant converter (CIHRC) with wireless power transfer function / Rahimi Baharom

In this thesis, the three-phase AC-DC current injection hybrid (series-parallel) resonant converter (CIHRC) is proposed to achieve a high power factor by injecting highfrequency currents into the three-phase diode bridge rectifier, producing a high frequency modulation signal with only two soft-swit...

Full description

Bibliographic Details
Main Author:	Baharom, Rahimi
Format:	Thesis
Language:	English
Published:	2018
Subjects:	Electric power distribution. Electric power transmission
Online Access:	http://ir.uitm.edu.my/id/eprint/21947/ http://ir.uitm.edu.my/id/eprint/21947/1/TP_RAHIMI%20BAHAROM%20EE%2018_5.pdf

id	uitm-21947
recordtype	eprints
spelling	uitm-219472018-11-01T08:21:39Z http://ir.uitm.edu.my/id/eprint/21947/ Three-phase AC-DC current injection hybrid resonant converter (CIHRC) with wireless power transfer function / Rahimi Baharom Baharom, Rahimi Electric power distribution. Electric power transmission In this thesis, the three-phase AC-DC current injection hybrid (series-parallel) resonant converter (CIHRC) is proposed to achieve a high power factor by injecting highfrequency currents into the three-phase diode bridge rectifier, producing a high frequency modulation signal with only two soft-switched active devices. The hybrid configuration resonant converter has the desirable characteristics of both series and parallel configurations. As such, the resonant current dependency problem of the typical series configuration circuit topology can be overcome, allowing the control of the output voltage at no-load or small load conditions. With an appropriate design of hybrid resonant circuit and a suitable switching frequency selection, the devices is capable to operate under virtually lossless zero voltage switching (ZVS) conditions allowing reduction in the size of inductive and magnetic components with high frequency operation. The early stage of the research work involved the derivation of detailed description of the steady-state analysis and characteristics of the proposed CIHRC. The test-rig of 1 kW operating at 20 kHz is developed and tested to be in good agreement with the prediction and simulation results. Next, the small-signal model is developed to design the compensator for the output voltage regulation, in which the derivation of a small-signal model is done by considering the converter to consist of two stages; the line-frequency rectifier and high-frequency resonant circuit. The analysis of linefrequency of the three-phase PWM AC-DC converter is based on the standard method. The resulting circuit equations that are expressed in state-space form are then averaged to remove the ripple. The direct and quadrature (d-q) transformation method is adopted to eliminate the time variance in the equations. In order to model the high-frequency resonant stage, the fundamental frequency methods are adopted. To match the line frequency equations of the three-phase PWM AC-DC converter with the highfrequency resonant stage equations, the power balanced relationship for the DC link methods are employed. Then, by considering small perturbations in all variables, the resulting non-linear model is linearised. The small-signal model is used to design the closed loop controller for the proposed three-phase AC-DC CIHRC. Such closed loop controller of the converter is designed based on the classical techniques of linear network and control theory. In addition, the compensator for the output voltage regulation is designed based on the open-loop control-to-output frequency response, the location of poles and also the trade-off between reducing the output voltage ripple and maintaining the high quality input line current. Design of this controller is verified under small signal change in the load, which is implemented by increasing and decreasing the parameters of the load resistor. With the successful application of the small-signal model in the closed-loop control, the output voltage regulation of the CIHRC is achieved. The proposed converter is further modified to operate wirelessly to provide wireless power transfer feature as an example of one of the salient application of CIHRC. High power transfer efficiency of 92 % is obtained showing the feasibility of the converter implementation in the wireless power transfer application whilst maintaining high input power factor. An experimental test-rig is constructed to verify the operation of the proposed system. 2018 Thesis NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/21947/1/TP_RAHIMI%20BAHAROM%20EE%2018_5.pdf Baharom, Rahimi (2018) Three-phase AC-DC current injection hybrid resonant converter (CIHRC) with wireless power transfer function / Rahimi Baharom. PhD thesis, Universiti Teknologi MARA.
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Teknologi MARA
building	UiTM Institutional Repository
collection	Online Access
language	English
topic	Electric power distribution. Electric power transmission
spellingShingle	Electric power distribution. Electric power transmission Baharom, Rahimi Three-phase AC-DC current injection hybrid resonant converter (CIHRC) with wireless power transfer function / Rahimi Baharom
description	In this thesis, the three-phase AC-DC current injection hybrid (series-parallel) resonant converter (CIHRC) is proposed to achieve a high power factor by injecting highfrequency currents into the three-phase diode bridge rectifier, producing a high frequency modulation signal with only two soft-switched active devices. The hybrid configuration resonant converter has the desirable characteristics of both series and parallel configurations. As such, the resonant current dependency problem of the typical series configuration circuit topology can be overcome, allowing the control of the output voltage at no-load or small load conditions. With an appropriate design of hybrid resonant circuit and a suitable switching frequency selection, the devices is capable to operate under virtually lossless zero voltage switching (ZVS) conditions allowing reduction in the size of inductive and magnetic components with high frequency operation. The early stage of the research work involved the derivation of detailed description of the steady-state analysis and characteristics of the proposed CIHRC. The test-rig of 1 kW operating at 20 kHz is developed and tested to be in good agreement with the prediction and simulation results. Next, the small-signal model is developed to design the compensator for the output voltage regulation, in which the derivation of a small-signal model is done by considering the converter to consist of two stages; the line-frequency rectifier and high-frequency resonant circuit. The analysis of linefrequency of the three-phase PWM AC-DC converter is based on the standard method. The resulting circuit equations that are expressed in state-space form are then averaged to remove the ripple. The direct and quadrature (d-q) transformation method is adopted to eliminate the time variance in the equations. In order to model the high-frequency resonant stage, the fundamental frequency methods are adopted. To match the line frequency equations of the three-phase PWM AC-DC converter with the highfrequency resonant stage equations, the power balanced relationship for the DC link methods are employed. Then, by considering small perturbations in all variables, the resulting non-linear model is linearised. The small-signal model is used to design the closed loop controller for the proposed three-phase AC-DC CIHRC. Such closed loop controller of the converter is designed based on the classical techniques of linear network and control theory. In addition, the compensator for the output voltage regulation is designed based on the open-loop control-to-output frequency response, the location of poles and also the trade-off between reducing the output voltage ripple and maintaining the high quality input line current. Design of this controller is verified under small signal change in the load, which is implemented by increasing and decreasing the parameters of the load resistor. With the successful application of the small-signal model in the closed-loop control, the output voltage regulation of the CIHRC is achieved. The proposed converter is further modified to operate wirelessly to provide wireless power transfer feature as an example of one of the salient application of CIHRC. High power transfer efficiency of 92 % is obtained showing the feasibility of the converter implementation in the wireless power transfer application whilst maintaining high input power factor. An experimental test-rig is constructed to verify the operation of the proposed system.
format	Thesis
author	Baharom, Rahimi
author_facet	Baharom, Rahimi
author_sort	Baharom, Rahimi
title	Three-phase AC-DC current injection hybrid resonant converter (CIHRC) with wireless power transfer function / Rahimi Baharom
title_short	Three-phase AC-DC current injection hybrid resonant converter (CIHRC) with wireless power transfer function / Rahimi Baharom
title_full	Three-phase AC-DC current injection hybrid resonant converter (CIHRC) with wireless power transfer function / Rahimi Baharom
title_fullStr	Three-phase AC-DC current injection hybrid resonant converter (CIHRC) with wireless power transfer function / Rahimi Baharom
title_full_unstemmed	Three-phase AC-DC current injection hybrid resonant converter (CIHRC) with wireless power transfer function / Rahimi Baharom
title_sort	three-phase ac-dc current injection hybrid resonant converter (cihrc) with wireless power transfer function / rahimi baharom
publishDate	2018
url	http://ir.uitm.edu.my/id/eprint/21947/ http://ir.uitm.edu.my/id/eprint/21947/1/TP_RAHIMI%20BAHAROM%20EE%2018_5.pdf
first_indexed	2023-09-18T23:07:37Z
last_indexed	2023-09-18T23:07:37Z
_version_	1777418588395667456

Three-phase AC-DC current injection hybrid resonant converter (CIHRC) with wireless power transfer function / Rahimi Baharom

Similar Items