Design of multipurpose table based on anthropometric data / Nur Athirah Mohd Adzha
This study was conducted to analyze the existing anthropometric data to make the functional design of the multipurpose table. The multipurpose table was choose due to the current issue, which are small space of the room and not suitable for the space. The raw material for the multipurpose table...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Applied Sciences
2015
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/20184/ http://ir.uitm.edu.my/id/eprint/20184/2/PPb_NUR%20ATHIRAH%20MOHD%20ADZHA%20AS%20C%2015_5.pdf |
| Summary: | This study was conducted to analyze the existing anthropometric data to
make the functional design of the multipurpose table. The multipurpose
table was choose due to the current issue, which are small space of the
room and not suitable for the space. The raw material for the
multipurpose table is blackboard, because the blockboard easy to get and
light in weight. In addition, the anthropometric data take from the previous
student thesis in furniture (bachelor) and it is consists 13 physical
dimensions. The anthropometric data between male and female students
was analyzed to get the average dimensions to make the multipurpose
table. Furthermore, in the study, anthropometric data for male students is
higher than the female students. The anthropometric data is very
important to make the furniture because people have difference size and
shape, therefore the furniture cannot be produce without refer to the
anthropometric data. After that, the selection of the physical dimensions
of the anthropometric data also is very important to make the furniture.
This is because, when the selection of the physical dimensions is wrong.
so the dimensions of the furniture also will be wrong. |
|---|