A single measurement of combined direct and indirect MPPT algorithm for mismatch PV module application / Mohd Najib Mohd Hussain
The use of module integrated converter (MIC) topologies for photovoltaic (PV) system is to harvest the maximum power point of PV module from solar irradiance. MIC is a promising method to keep the electrical power output from PV module at maximum capacity through maximum power point tracking (MPPT)...
| Main Author: | |
|---|---|
| Format: | Book Section |
| Language: | English |
| Published: |
Institute of Graduate Studies, UiTM
2016
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/20016/ http://ir.uitm.edu.my/id/eprint/20016/1/ABS_MOHD%20NAJIB%20MOHD%20HUSSAIN%20TDRA%20VOL%2010%20IGS%2016.pdf |
| Summary: | The use of module integrated converter (MIC) topologies for photovoltaic (PV) system is to harvest the maximum power point of PV module from solar irradiance. MIC is a promising method to keep the electrical power output from PV module at maximum capacity through maximum power point tracking (MPPT) algorithm during full-sun and mismatch module occurrence. This thesis focussed on the development of PV module integrated with positive output (PO) buck-boost converter by intelligent control of MPPT technique. A novel of combination direct and indirect (CoDId) MPPT algorithm is implemented for solving mismatch losses from existing PV system by employing the implementation of system identification approach. System identification is established via utilization of multi-input single-output (MISO) model and incorporation with simple iteration scheme. The main intention of this study is to develop a single sensor measurement of instantaneous output current from PV system in order to track maximum power point of the PV module. The signal from the sensor is then applied for power switching devices of the PO buckboost converter by the attained maximum power point current from CoDID MPPT method… |
|---|