Development of a new coating raw material based on a mixture of epoxidized palm olein and diglycidyl ether of bisphenol a / Reihan Mohd Taharim

Epoxy coatings are highly in demand due to their excellent corrosion protective properties. Currently, raw materials for epoxy coatings mainly originate from diglycidyl ether of bisphenol A (DGEBA), a compound derived from petrochemicals. However, health concerns associated with bisphenol A, combine...

Full description

Bibliographic Details
Main Author: Mohd Taharim, Reihan
Format: Thesis
Language:English
Published: 2014
Online Access:http://ir.uitm.edu.my/id/eprint/18452/
http://ir.uitm.edu.my/id/eprint/18452/2/TM_REIHAN%20MOHA%20TAHARIM%20EH%2014_5.pdf
id uitm-18452
recordtype eprints
spelling uitm-184522019-02-21T08:06:40Z http://ir.uitm.edu.my/id/eprint/18452/ Development of a new coating raw material based on a mixture of epoxidized palm olein and diglycidyl ether of bisphenol a / Reihan Mohd Taharim Mohd Taharim, Reihan Epoxy coatings are highly in demand due to their excellent corrosion protective properties. Currently, raw materials for epoxy coatings mainly originate from diglycidyl ether of bisphenol A (DGEBA), a compound derived from petrochemicals. However, health concerns associated with bisphenol A, combined with the limited supply of petroleum are driving researchers to look for alternative raw materials. Plant oils are considered as potential alternative resources to generate more environmentally-friendly coating formulations. This study aims to investigate the possibility of developing a new raw material for coating using a mixture of epoxidized palm olein (EPO) and DGEBA. and subsequently evaluate the resulting coating filnr s properties and performance. The main study was done in four stages. In the first stage, coatings containing 0-30 wt. % EPO were formulated and applied on mild steel plates. The coating was then tested for adhesion, hardness, chemical resistance, water resistance and solvent resistance. The third and final stages consisted of EIS study and performance tests, respectively. The EIS study shows that the corrosion protection from EPO is comparable to that of a conventional epoxy coating. Natural weathering test was carried out for 90 days while a cyclic salt fog/UV exposure test took place for 30 days. EP030 did not show any sign of rusting or blistering upon exposure to both weathering conditions. Weathering study indicated that EPO imparted to the EPO/epoxy coating a higher tendency to discolor upon weathering in comparison on conventional epoxy coatings. Nonetheless, EIS response and weathering test results suggested that EP030 performed as well as conventional epoxy coatings in protecting metallic substrates from corrosion. 2014 Thesis NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/18452/2/TM_REIHAN%20MOHA%20TAHARIM%20EH%2014_5.pdf Mohd Taharim, Reihan (2014) Development of a new coating raw material based on a mixture of epoxidized palm olein and diglycidyl ether of bisphenol a / Reihan Mohd Taharim. Masters thesis, Universiti Teknologi MARA.
repository_type Digital Repository
institution_category Local University
institution Universiti Teknologi MARA
building UiTM Institutional Repository
collection Online Access
language English
description Epoxy coatings are highly in demand due to their excellent corrosion protective properties. Currently, raw materials for epoxy coatings mainly originate from diglycidyl ether of bisphenol A (DGEBA), a compound derived from petrochemicals. However, health concerns associated with bisphenol A, combined with the limited supply of petroleum are driving researchers to look for alternative raw materials. Plant oils are considered as potential alternative resources to generate more environmentally-friendly coating formulations. This study aims to investigate the possibility of developing a new raw material for coating using a mixture of epoxidized palm olein (EPO) and DGEBA. and subsequently evaluate the resulting coating filnr s properties and performance. The main study was done in four stages. In the first stage, coatings containing 0-30 wt. % EPO were formulated and applied on mild steel plates. The coating was then tested for adhesion, hardness, chemical resistance, water resistance and solvent resistance. The third and final stages consisted of EIS study and performance tests, respectively. The EIS study shows that the corrosion protection from EPO is comparable to that of a conventional epoxy coating. Natural weathering test was carried out for 90 days while a cyclic salt fog/UV exposure test took place for 30 days. EP030 did not show any sign of rusting or blistering upon exposure to both weathering conditions. Weathering study indicated that EPO imparted to the EPO/epoxy coating a higher tendency to discolor upon weathering in comparison on conventional epoxy coatings. Nonetheless, EIS response and weathering test results suggested that EP030 performed as well as conventional epoxy coatings in protecting metallic substrates from corrosion.
format Thesis
author Mohd Taharim, Reihan
spellingShingle Mohd Taharim, Reihan
Development of a new coating raw material based on a mixture of epoxidized palm olein and diglycidyl ether of bisphenol a / Reihan Mohd Taharim
author_facet Mohd Taharim, Reihan
author_sort Mohd Taharim, Reihan
title Development of a new coating raw material based on a mixture of epoxidized palm olein and diglycidyl ether of bisphenol a / Reihan Mohd Taharim
title_short Development of a new coating raw material based on a mixture of epoxidized palm olein and diglycidyl ether of bisphenol a / Reihan Mohd Taharim
title_full Development of a new coating raw material based on a mixture of epoxidized palm olein and diglycidyl ether of bisphenol a / Reihan Mohd Taharim
title_fullStr Development of a new coating raw material based on a mixture of epoxidized palm olein and diglycidyl ether of bisphenol a / Reihan Mohd Taharim
title_full_unstemmed Development of a new coating raw material based on a mixture of epoxidized palm olein and diglycidyl ether of bisphenol a / Reihan Mohd Taharim
title_sort development of a new coating raw material based on a mixture of epoxidized palm olein and diglycidyl ether of bisphenol a / reihan mohd taharim
publishDate 2014
url http://ir.uitm.edu.my/id/eprint/18452/
http://ir.uitm.edu.my/id/eprint/18452/2/TM_REIHAN%20MOHA%20TAHARIM%20EH%2014_5.pdf
first_indexed 2023-09-18T23:00:33Z
last_indexed 2023-09-18T23:00:33Z
_version_ 1777418144514572288