Nanostructured Mg and Al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / Nurhanna Batar @ Badar
In this research, the novel properties and potential applications of some nanostructured metal oxides and thin film metal oxides were studied. This work consists of mainly two parts, firstly the nano and micron powders investigation and secondly the thin film characteristics. The characteristics of...
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2015
|
| Online Access: | http://ir.uitm.edu.my/id/eprint/17824/ http://ir.uitm.edu.my/id/eprint/17824/2/TP_NURHANNA%20BATAR%40BADAR%20AS%2015_5.pdf |
| id |
uitm-17824 |
|---|---|
| recordtype |
eprints |
| spelling |
uitm-178242018-09-27T02:31:06Z http://ir.uitm.edu.my/id/eprint/17824/ Nanostructured Mg and Al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / Nurhanna Batar @ Badar Batar @ Badar, Nurhanna In this research, the novel properties and potential applications of some nanostructured metal oxides and thin film metal oxides were studied. This work consists of mainly two parts, firstly the nano and micron powders investigation and secondly the thin film characteristics. The characteristics of nano powders have to be investigated first before thin film nanostructures are being researched, that is why it is important to study the characteristics of AI₂O₃ and MgO nano powders first. MgO and AI₂O₃ nano powders and its doped materials, Mg₁₋ₓCuₓO (x = 0.02, 0.04, 0.06) and Al₂₋ₓCrₓO₃ (x = 0.1, 0.2, 0.3) were synthesized using a combustion method. The study on doped compounds is to investigate band gap changes in the new materials. The synthesis conditions were optimized to obtain pure nanostructured metal oxides. In this work, it is found that the synthesis route using triethanolamine for the combustion synthesis is suitable in obtaining pure and single phase MgO, AI₂O₃, Mg₁₋ₓCuₓO and Al₂₋ₓCrₓO₃ materials. The presence of substitutional elements in the MgO, AI₂O₃ lattice had caused changes in morphologies and crystallite size of the materials. The band gaps and electronic band transitions were studied and found to be quite intimately connected with their functionalities. The band gap energies of MgO, AI₂O₃ obtained from the synthesis exhibit lower band gap energies than the standard value of the bulk MgO, AI₂O₃ but these results agree with work done in recent findings using more modern equipment. It was also found that the presence of substitutional elements Cu and Cr in MgO, AI₂O₃ lattice, respectively modifies the band spectra causing band gap narrowing in the materials. For thin film fabrication, high quality ultra-thin MgO, AI₂O₃ films were fabricated via the Pulsed Laser Deposition (PLD) method using different process parameters. The purpose is to see the effects of reducing the thickness of the thin films to nano dimension on the I-V characteristics of the thin film samples and investigate the reasons behind the observed experimental results. It was also to see if reducing the length in 1-D scale will affect the band gaps of the thin films. Thin film characteristics such as phase, purity, crystal growth direction, morphology and thickness are measured and studied. It was observed that the band gap of the thin films increased as the thickness decreased due to quantum effects, however, turn-on voltage has the opposite effect. This can be seen for both MgO, AI₂O₃ thin films. The decrease of the turn-on as well as the tunnelling voltage of the thinner films despite their larger band gap is a direct experimental evidence of quantum tunnelling effects in the thin films. This also proves that the quantum tunnelling effect is more prominent in low dimensional structures. Valence band offset of the thin films seem to play an important role to the electron dynamics of quantum tunnelling. According to the experimental results, AI₂O₃ thin films were found to be more useful for MOS application compared to MgO thin films. 2015 Thesis NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/17824/2/TP_NURHANNA%20BATAR%40BADAR%20AS%2015_5.pdf Batar @ Badar, Nurhanna (2015) Nanostructured Mg and Al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / Nurhanna Batar @ Badar. PhD thesis, Universiti Teknologi MARA. |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Teknologi MARA |
| building |
UiTM Institutional Repository |
| collection |
Online Access |
| language |
English |
| description |
In this research, the novel properties and potential applications of some nanostructured metal oxides and thin film metal oxides were studied. This work consists of mainly two parts, firstly the nano and micron powders investigation and secondly the thin film characteristics. The characteristics of nano powders have to be investigated first before thin film nanostructures are being researched, that is why it is important to study the characteristics of AI₂O₃ and MgO nano powders first. MgO and AI₂O₃ nano powders and its doped materials, Mg₁₋ₓCuₓO (x = 0.02, 0.04, 0.06) and Al₂₋ₓCrₓO₃ (x = 0.1, 0.2, 0.3) were synthesized using a combustion method. The study on doped compounds is to investigate band gap changes in the new materials. The synthesis conditions were optimized to obtain pure nanostructured metal oxides. In this work, it is found that the synthesis route using triethanolamine for the combustion synthesis is suitable in obtaining pure and single phase MgO, AI₂O₃, Mg₁₋ₓCuₓO and Al₂₋ₓCrₓO₃ materials. The presence of substitutional elements in the MgO, AI₂O₃ lattice had caused changes in morphologies and crystallite size of the materials. The band gaps and electronic band transitions were studied and found to be quite intimately connected with their functionalities. The band gap energies of MgO, AI₂O₃ obtained from the synthesis exhibit lower band gap energies than the standard value of the bulk MgO, AI₂O₃ but these results agree with work done in recent findings using more modern equipment. It was also found that the presence of substitutional elements Cu and Cr in MgO, AI₂O₃ lattice, respectively modifies the band spectra causing band gap narrowing in the materials. For thin film fabrication, high quality ultra-thin MgO, AI₂O₃ films were fabricated via the Pulsed Laser Deposition (PLD) method using different process parameters. The purpose is to see the effects of reducing the thickness of the thin films to nano dimension on the I-V characteristics of the thin film samples and investigate the reasons behind the observed experimental results. It was also to see if reducing the length in 1-D scale will affect the band gaps of the thin films. Thin film characteristics such as phase, purity, crystal growth direction, morphology and thickness are measured and studied. It was observed that the band gap of the thin films increased as the thickness decreased due to quantum effects, however, turn-on voltage has the opposite effect. This can be seen for both MgO, AI₂O₃ thin films. The decrease of the turn-on as well as the tunnelling voltage of the thinner films despite their larger band gap is a direct experimental evidence of quantum tunnelling effects in the thin films. This also proves that the quantum tunnelling effect is more prominent in low dimensional structures. Valence band offset of the thin films seem to play an important role to the electron dynamics of quantum tunnelling. According to the experimental results, AI₂O₃ thin films were found to be more useful for MOS application compared to MgO thin films. |
| format |
Thesis |
| author |
Batar @ Badar, Nurhanna |
| spellingShingle |
Batar @ Badar, Nurhanna Nanostructured Mg and Al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / Nurhanna Batar @ Badar |
| author_facet |
Batar @ Badar, Nurhanna |
| author_sort |
Batar @ Badar, Nurhanna |
| title |
Nanostructured Mg and Al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / Nurhanna Batar @ Badar |
| title_short |
Nanostructured Mg and Al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / Nurhanna Batar @ Badar |
| title_full |
Nanostructured Mg and Al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / Nurhanna Batar @ Badar |
| title_fullStr |
Nanostructured Mg and Al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / Nurhanna Batar @ Badar |
| title_full_unstemmed |
Nanostructured Mg and Al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / Nurhanna Batar @ Badar |
| title_sort |
nanostructured mg and al oxides by a combustion synthesis method and fabrication of the thin films by pulsed laser deposition / nurhanna batar @ badar |
| publishDate |
2015 |
| url |
http://ir.uitm.edu.my/id/eprint/17824/ http://ir.uitm.edu.my/id/eprint/17824/2/TP_NURHANNA%20BATAR%40BADAR%20AS%2015_5.pdf |
| first_indexed |
2023-09-18T22:59:09Z |
| last_indexed |
2023-09-18T22:59:09Z |
| _version_ |
1777418055913046016 |