Pack bonding - a low cost method to improve the wear resistance of steels / S. Darius Gnanaraj … [et al.]
A relatively new, low cost technique, pack bonding is presented for increasing the wear resistance of steels used in machine components. The borided and unbonded specimens were subjected to wear tests under the same conditions and using a pin-on-disc test rig and the results are compared. Other impo...
Main Author: | Gnanaraj, S. Darius |
---|---|
Format: | Article |
Language: | English |
Published: |
Faculty of Mechanical Engineering (FKM) and UiTM Press
2011
|
Online Access: | http://ir.uitm.edu.my/id/eprint/17586/ http://ir.uitm.edu.my/id/eprint/17586/2/AJ_S.%20DARIUS%20GNANARAJ%20JME%2011.pdf |
Similar Items
-
Experimental study of pack carburizing of carbon steel
by: Hazizi Azri, Ahmad Sabri
Published: (2011) -
Structural and wear and characteristic of low temperature
nitrided stainless steel
by: Haruman, E., et al.
Published: (2006) -
Strength investigation on resistance spot welding of low carbon steel and stainless steel
by: Mohd Nur Syaffiq, Mahmood
Published: (2013) -
Chromium Enrichment on P11 Ferritic Steel by Pack Cementation
by: F. A., Fauzi, et al.
Published: (2016) -
Pack and stack
by: Gan
Published: (1993)