Tensile performance of half-lap timber nailed joint strengthened using CFRP sheet / Nurain Rosdi … [et al.]
The strength of timber structure will slightly reduce due to long service life or constantly sustained under excessive load. Some of the structural member may need to be replaced or rectified. This paper presents findings on the half-lap timber joint strengthened using carbon fibre reinforced polyme...
Main Authors: | Rosdi, Nurain, Nik Yahya, Nik Norhafiza, Hassan, Rohana, Yasin, Mohd Hanafie, Abd Malek, Nor Jihan |
---|---|
Format: | Article |
Language: | English |
Published: |
Faculty of Mechanical Engineering & UiTM Press
2017
|
Subjects: | |
Online Access: | http://ir.uitm.edu.my/id/eprint/17468/ http://ir.uitm.edu.my/id/eprint/17468/1/AJ_NURAIN%20ROSDI%20JME%2017.pdf |
Similar Items
-
Development of an economical lapping process
by: Konneh, Mohamed, et al.
Published: (2012) -
Performance evaluation of drilling tools during machining plain Carbon Fiber Reinforced Polymer (CFRP)
by: Konneh, Mohamed, et al.
Published: (2015) -
Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills
by: Konneh, Mohamed, et al.
Published: (2014) -
Influence of machining parameters on temperature when drilling carbon fiber reinforced polymer (CFRP) using coated diamond drills
by: Konneh, Mohamed, et al.
Published: (2015) -
Investigation of delamination at exit of drilled carbon fiber reinforced polymer (CFRP) composite with diamond coated ball nose drills
by: Konneh, Mohamed, et al.
Published: (2015)