Synthesis and characterization of polyene from polyvinylchloride (PVC) and its coating properties with epoxidised oil resin / Mohd Nurazzi Norizan

Synthesis and characterization of polyene from polyvinylchloride (PVC) and its coating properties with epoxidised oil resin / Mohd Nurazzi Norizan

Synthesis of polyene for development of conductive coating involves new research area. Hence, this study was aimed to produce the polyene itself from polyvinylchloride (PVC) and disperse into a sustainable oil matrix as coating. Effect of dechlorination of PVC employing different reaction time and c...

Full description

Bibliographic Details
Main Author: Norizan, Mohd Nurazzi
Format: Thesis
Language:English
Published: 2014
Online Access:http://ir.uitm.edu.my/id/eprint/17380/
http://ir.uitm.edu.my/id/eprint/17380/2/TM_MOHD%20NURAZZI%20NORIZAN%20AS%2014_5.pdf
id uitm-17380
recordtype eprints
spelling uitm-173802018-10-25T02:03:53Z http://ir.uitm.edu.my/id/eprint/17380/ Synthesis and characterization of polyene from polyvinylchloride (PVC) and its coating properties with epoxidised oil resin / Mohd Nurazzi Norizan Norizan, Mohd Nurazzi Synthesis of polyene for development of conductive coating involves new research area. Hence, this study was aimed to produce the polyene itself from polyvinylchloride (PVC) and disperse into a sustainable oil matrix as coating. Effect of dechlorination of PVC employing different reaction time and conditions were studied. Synthesized polyene formed upon dechlorination process via chemical method was characterized before the polyene powders were dispersed in epoxidised oil (EO) which acts as binder for coating on glass substrate. All polyene powders were then doped with 5% percent of potassium iodide (KI) and the highest value of conductivity was selected to be doped with 10%, 20% and 30% of KI. Thermal characterization via thermal gravimetry analysis and differential scanning calorimetry analysis were also performed to determine the properties of polyene after the dechlorination. For the polyene coated film, conductivity test, UV/Visible and energy band gap determination and wettability study were characterized. Wettability properties of polyene coated layer onto glass slide were determined by performing contact angle test. Based on the elemental analysis by energydispersive x-ray spectroscopy (EDS), it is shown that a maximum about 95% of chlorine was eliminated after 2 hours reaction time of dechlorination process. Existence of conjugated bond and effect of doping onto polyene were proven through fourier transform infrared (FTIR) and polyene index. As for polyene powder/ modified EO coated film, sample with 2 hours reaction time showed optimum value of conductivity before and after doped with 5% KI with the value of 1.92 x 10¯³ Scm¯¹ and 3.37 x 10¯³ Scm¯¹ respectively. Hence, in the second stage of analysis, the 2 hours sample was chosen to be doped with 10%, 20% and 30% of KI for analysis of doping effect on conductivity. Based on UV/Vis analysis, the wavelength of maximum absorbance was found to have various absorption peaks due to the different existence of chain conjugation phenomena. UV wavelength absorbance peak values give energy band gap relation and can thus be calculated. Wettability properties of polyene coated layer onto glass slide were also performed to determine the contact angle of film. 2014 Thesis NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/17380/2/TM_MOHD%20NURAZZI%20NORIZAN%20AS%2014_5.pdf Norizan, Mohd Nurazzi (2014) Synthesis and characterization of polyene from polyvinylchloride (PVC) and its coating properties with epoxidised oil resin / Mohd Nurazzi Norizan. Masters thesis, Universiti Teknologi MARA.
repository_type Digital Repository
institution_category Local University
institution Universiti Teknologi MARA
building UiTM Institutional Repository
collection Online Access
language English
description Synthesis of polyene for development of conductive coating involves new research area. Hence, this study was aimed to produce the polyene itself from polyvinylchloride (PVC) and disperse into a sustainable oil matrix as coating. Effect of dechlorination of PVC employing different reaction time and conditions were studied. Synthesized polyene formed upon dechlorination process via chemical method was characterized before the polyene powders were dispersed in epoxidised oil (EO) which acts as binder for coating on glass substrate. All polyene powders were then doped with 5% percent of potassium iodide (KI) and the highest value of conductivity was selected to be doped with 10%, 20% and 30% of KI. Thermal characterization via thermal gravimetry analysis and differential scanning calorimetry analysis were also performed to determine the properties of polyene after the dechlorination. For the polyene coated film, conductivity test, UV/Visible and energy band gap determination and wettability study were characterized. Wettability properties of polyene coated layer onto glass slide were determined by performing contact angle test. Based on the elemental analysis by energydispersive x-ray spectroscopy (EDS), it is shown that a maximum about 95% of chlorine was eliminated after 2 hours reaction time of dechlorination process. Existence of conjugated bond and effect of doping onto polyene were proven through fourier transform infrared (FTIR) and polyene index. As for polyene powder/ modified EO coated film, sample with 2 hours reaction time showed optimum value of conductivity before and after doped with 5% KI with the value of 1.92 x 10¯³ Scm¯¹ and 3.37 x 10¯³ Scm¯¹ respectively. Hence, in the second stage of analysis, the 2 hours sample was chosen to be doped with 10%, 20% and 30% of KI for analysis of doping effect on conductivity. Based on UV/Vis analysis, the wavelength of maximum absorbance was found to have various absorption peaks due to the different existence of chain conjugation phenomena. UV wavelength absorbance peak values give energy band gap relation and can thus be calculated. Wettability properties of polyene coated layer onto glass slide were also performed to determine the contact angle of film.
format Thesis
author Norizan, Mohd Nurazzi
spellingShingle Norizan, Mohd Nurazzi
Synthesis and characterization of polyene from polyvinylchloride (PVC) and its coating properties with epoxidised oil resin / Mohd Nurazzi Norizan
author_facet Norizan, Mohd Nurazzi
author_sort Norizan, Mohd Nurazzi
title Synthesis and characterization of polyene from polyvinylchloride (PVC) and its coating properties with epoxidised oil resin / Mohd Nurazzi Norizan
title_short Synthesis and characterization of polyene from polyvinylchloride (PVC) and its coating properties with epoxidised oil resin / Mohd Nurazzi Norizan
title_full Synthesis and characterization of polyene from polyvinylchloride (PVC) and its coating properties with epoxidised oil resin / Mohd Nurazzi Norizan
title_fullStr Synthesis and characterization of polyene from polyvinylchloride (PVC) and its coating properties with epoxidised oil resin / Mohd Nurazzi Norizan
title_full_unstemmed Synthesis and characterization of polyene from polyvinylchloride (PVC) and its coating properties with epoxidised oil resin / Mohd Nurazzi Norizan
title_sort synthesis and characterization of polyene from polyvinylchloride (pvc) and its coating properties with epoxidised oil resin / mohd nurazzi norizan
publishDate 2014
url http://ir.uitm.edu.my/id/eprint/17380/
http://ir.uitm.edu.my/id/eprint/17380/2/TM_MOHD%20NURAZZI%20NORIZAN%20AS%2014_5.pdf
first_indexed 2023-09-18T22:58:11Z
last_indexed 2023-09-18T22:58:11Z
_version_ 1777417994904797184

Similar Items