Study on the compressive strength of concrete using construction and demolition waste as aggregates / Muhamad Nur Syafiq Mokhtar
The disposal of construction and demolition waste in landfills has caused major environmental concerns in country such as Malaysia, Hong Kong and European Union. Government of Malaysia sources indicate that there is an acute shortage of landfill space in Malaysia. To overcome this problem, suggestio...
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
Faculty of Architecture, Planning and Surveying
2013
|
| Online Access: | http://ir.uitm.edu.my/id/eprint/16557/ http://ir.uitm.edu.my/id/eprint/16557/2/PPb_MUHAMAD%20NUR%20SYAFIQ%20MOKHTAR%20AP%2013_5.pdf |
| Summary: | The disposal of construction and demolition waste in landfills has caused major environmental concerns in country such as Malaysia, Hong Kong and European Union. Government of Malaysia sources indicate that there is an acute shortage of landfill space in Malaysia. To overcome this problem, suggestion to recycle the construction and demolition waste to be used in concrete mix as a coarse aggregate was given. To prove that this idea can be used, some experiment need to be done. The four types of concrete that will be mix and test are normal concrete, concrete with containing 10% construction and demolition waste aggregate, concrete with containing 20% construction and demolition waste aggregate and concrete with containing 30% construction and demolition waste aggregate. The sizes of specimen are 100mm x 100mm x 100mm cube for compressive strength test. The testing have been carried out at the age 7,14 and 28 days for all specimens of concrete. The scope relates to the material and equipment that involved in this study and full fill the requirement according to standard BS 1881: Part 116:1983.According to the experiment test result, the value of compressive strength with 0% contents of construction and demolition waste are the highest, follow by the value of compressive strength with 10% contents of construction and demolition waste, than follow by the value of compressive strength with 20% contents of construction and demolition waste and the lowest value of the compressive strength fall to 30% contents of construction and demolition waste. The value of compressive strength that produced by all the three different percentage of construction and demolition waste, it show that all the three concrete mix comply and pass the target of concrete that use for this experiment it is Grade 20. Because of that, once again we can conclude that the construction and demolition waste can be used as a coarse aggregate in the concrete mix. |
|---|