Q-switching and mode-locking pulse generation based on passive techniques / Amri Ab. Rahman
The field of fiber lasers and fiber optic devices has experienced a sustained rapid growth despite witnessing the infamous 'telecom bubble burst'. All-fiber optic devices have inherent advantages of relatively low cost, compact design, light weight, low maintenance, and increased vibration...
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2015
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/16060/ http://ir.uitm.edu.my/id/eprint/16060/1/TP_AMRI%20AB.%20RAHMAN%20CS%2015_5.pdf |
| Summary: | The field of fiber lasers and fiber optic devices has experienced a sustained rapid growth despite witnessing the infamous 'telecom bubble burst'. All-fiber optic devices have inherent advantages of relatively low cost, compact design, light weight, low maintenance, and increased vibration tolerances. In this research, various new fiber lasers operating in Q-switching and mode-locking modes are proposed and demonstrated. At first, Q-switched Erbium-doped fiber lasers are demonstrated using a homemade passive saturable absorber (SA) based on singlewalled carbon nanotubes (SWCNTs) and graphene oxide films. For instance, with the use of a SWCNTs-Polyvinyl alcohol (PVA) SA, the laser has a multi-wavelength output at 1533.5 nm region with a repetition rate of 13.1 kHz, pulse width of 7.2 IlS and pulse energy of 21 nJ at the pump power of 64 mW. Two mode-locked EDFLs are also demonstrated using a homemade SA based on SWCNTs. For instance, a stable mode-locked EDFL is demonstrated using SWCNTs-PVA SA to generate a dissipative soliton pulse train operating in 1533.6 nm region. At pump power above the threshold value of 35.2 mW, the EDFL generates a self-starting pulse train with duration of 1.8 ps and repetition rate of 15.3 MHz. Besides showing good Qswitching and mode-locking performances, the proposed new saturable absorbers are easy to fabricate and cheap. Finally, we explore a new technique based on nonlinear polarization rotation (NPR) to demonstrate both Q-switched and modelocked fiber lasers.For instance, a stable passive Q-switched EDFL operating at 1534.5 nm region is demonstrated by employing a polarization dependent isolator and a highly nonlinear Erbium-doped fiber (EDF) to induce intensity dependent loss in a sufficiently-high lossy ring cavity. A simple NPR based EDFL with three switchable operation states have also been successfully demonstrated by employing a 6.9 km long dispersion shifted fiber (DSF) in the ring cavity. It firstly generates a square dissipative soliton pulse with a repetition rate of 87 kHz.Then, the laser produces a fundamental repetition rate of 29 kHz with a fixed pulse width of 8.5 JlS with the maximum pulse energy of 131.5 nJ is achieved at the pump power of 116.7 mW. Finally, the EDFL produces a fixed pulse width of 2.8 IJ,S and harmonic pulse repetition rate of 58 kHz. Q-switched and mode-locked EDFLs have wide and important applications in many fields such as optical communications, laser micromachining, optical sensors and laser ablation. |
|---|