Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar

The non-renewable source of petroleum based plastic such as Polyethylene (PE), calls for a need to look into this natural based polymer. Polylactic acid (PLA) is the promising synthetic polymer which is derived from the natural monomer lactic acid extracted from starch such as com starch; whereby ne...

Full description

Bibliographic Details
Main Author:	Mohd Makhtar, Nurul Shuhada
Format:	Thesis
Language:	English
Published:	2015
Subjects:	Polymers and polymer manufacture Biotechnology
Online Access:	http://ir.uitm.edu.my/id/eprint/15966/ http://ir.uitm.edu.my/id/eprint/15966/1/TM_NURUL%20SHUHADA%20NOHD%20MAKHTAR%20EH%2015_5.pdf

id	uitm-15966
recordtype	eprints
spelling	uitm-159662017-01-03T13:53:07Z http://ir.uitm.edu.my/id/eprint/15966/ Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar Mohd Makhtar, Nurul Shuhada Polymers and polymer manufacture Biotechnology The non-renewable source of petroleum based plastic such as Polyethylene (PE), calls for a need to look into this natural based polymer. Polylactic acid (PLA) is the promising synthetic polymer which is derived from the natural monomer lactic acid extracted from starch such as com starch; whereby need to compete as a staple food. Therefore, in this research, new source of starch called Tacca leontopetaloides is introduced, which has potential to be utilized as raw material to produce biopolymer such as bio-thermoplastic elastomers. The incorporated plasticized Tacca starch and matrix natural rubber filled with silica from rice husk and sulphur vulcanization by using two roll-mill machine is producing a bio-thermoplastic elastomer. The chemical, thermal and mechanical study was done on two formulations, firstly to evaluate the effect of volume plasticizers and secondly to study the effect of natural rubber and glycerol ratio in the blending process. The best mechanical and thermal characteristic was then compared with PE/NR/Silica and PLA/NR/Silica blends as a standard TPE. Among the TPEs, TPE 15 with 50:6 natural rubber to glycerol ratio had showed higher tensile strength at 1.467 MPa and elongation at break at 265 mm with higher thermal resistant leaving 24.8 % amount of residue at 500 °C. This property is highly achieved the minimum tensile needed for floor mat production at 0.294 MPa with minimum elongation at 200 mm. Based on this, Tacca leontopetaloides starch plasticized with glycerol and filled with silica rice husk has the capability to replace synthetic raw material used in producing bio-thermoplastic elastomer floor mat for car industry. 2015 Thesis NonPeerReviewed text en http://ir.uitm.edu.my/id/eprint/15966/1/TM_NURUL%20SHUHADA%20NOHD%20MAKHTAR%20EH%2015_5.pdf Mohd Makhtar, Nurul Shuhada (2015) Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar. Masters thesis, Universiti Teknologi MARA.
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Teknologi MARA
building	UiTM Institutional Repository
collection	Online Access
language	English
topic	Polymers and polymer manufacture Biotechnology
spellingShingle	Polymers and polymer manufacture Biotechnology Mohd Makhtar, Nurul Shuhada Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar
description	The non-renewable source of petroleum based plastic such as Polyethylene (PE), calls for a need to look into this natural based polymer. Polylactic acid (PLA) is the promising synthetic polymer which is derived from the natural monomer lactic acid extracted from starch such as com starch; whereby need to compete as a staple food. Therefore, in this research, new source of starch called Tacca leontopetaloides is introduced, which has potential to be utilized as raw material to produce biopolymer such as bio-thermoplastic elastomers. The incorporated plasticized Tacca starch and matrix natural rubber filled with silica from rice husk and sulphur vulcanization by using two roll-mill machine is producing a bio-thermoplastic elastomer. The chemical, thermal and mechanical study was done on two formulations, firstly to evaluate the effect of volume plasticizers and secondly to study the effect of natural rubber and glycerol ratio in the blending process. The best mechanical and thermal characteristic was then compared with PE/NR/Silica and PLA/NR/Silica blends as a standard TPE. Among the TPEs, TPE 15 with 50:6 natural rubber to glycerol ratio had showed higher tensile strength at 1.467 MPa and elongation at break at 265 mm with higher thermal resistant leaving 24.8 % amount of residue at 500 °C. This property is highly achieved the minimum tensile needed for floor mat production at 0.294 MPa with minimum elongation at 200 mm. Based on this, Tacca leontopetaloides starch plasticized with glycerol and filled with silica rice husk has the capability to replace synthetic raw material used in producing bio-thermoplastic elastomer floor mat for car industry.
format	Thesis
author	Mohd Makhtar, Nurul Shuhada
author_facet	Mohd Makhtar, Nurul Shuhada
author_sort	Mohd Makhtar, Nurul Shuhada
title	Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar
title_short	Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar
title_full	Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar
title_fullStr	Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar
title_full_unstemmed	Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar
title_sort	processing and characterization of biobased polymer derived from tacca leontopetaloides starch with rice husk silica and natural rubber blends / nurul shuhada mohd makhtar
publishDate	2015
url	http://ir.uitm.edu.my/id/eprint/15966/ http://ir.uitm.edu.my/id/eprint/15966/1/TM_NURUL%20SHUHADA%20NOHD%20MAKHTAR%20EH%2015_5.pdf
first_indexed	2023-09-18T22:55:03Z
last_indexed	2023-09-18T22:55:03Z
_version_	1777417798269534208

Processing and characterization of biobased polymer derived from Tacca leontopetaloides starch with rice husk silica and natural rubber blends / Nurul Shuhada Mohd Makhtar

Similar Items