Physical and mechanical properties of fibreboards from oil palm fibres and polyethylene / Mohd Ariff Jamaludin ... [et al.]
Three different oil palm based fibreboards were used in this study, each using different types of fibres. The fibre types were frond (OPF), trunk (OPT) and empty fruit bunch (EFB). Four different plastics mixes of 0%, 5%, 12% and 20% was used for each of the fibreboard types. There were a total of t...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Faculty of Applied Sciences
2005
|
| Subjects: | |
| Online Access: | http://ir.uitm.edu.my/id/eprint/11793/ http://ir.uitm.edu.my/id/eprint/11793/1/AJ_MOHD%20ARIFF%20JAMALUDIN%20SL%2005.pdf |
| id |
uitm-11793 |
|---|---|
| recordtype |
eprints |
| spelling |
uitm-117932016-09-06T05:05:35Z http://ir.uitm.edu.my/id/eprint/11793/ Physical and mechanical properties of fibreboards from oil palm fibres and polyethylene / Mohd Ariff Jamaludin ... [et al.] Jamaludin, Mohd Ariff Razali Bujang, Yul Haidzir Ramli, Ridzuan Nordin, Kamarulzaman Ahmad, Mansur Physical and theoretical chemistry Field crops Three different oil palm based fibreboards were used in this study, each using different types of fibres. The fibre types were frond (OPF), trunk (OPT) and empty fruit bunch (EFB). Four different plastics mixes of 0%, 5%, 12% and 20% was used for each of the fibreboard types. There were a total of twelve fibreboard types (3 fibres types X 4 polyethylene percentage content) used in this study. The fibreboards were manufactured to a targeted density of 850 kg/m3. Urea formaldehyde (UF) adhesive was used as part of the matrix at resin level of 10 percent. All the OPF boards and hybrid boards with 5% and 12% plastic content irrespective of the fibre types satisfied the 200-type board for modulus of rupture (MOR) as stated in the JIS-A-5906. The OPT boards and hybrid boards with 20% plastic content passed the JIS-A-5906 150-type board. The EFB boards only passed the JIS-A-5906 type-50 for the MOR. For Internal bonding (IB), all the fibreboards were able to meet the requirements of JIS-A-5906 type-300 board. In the case of thickness swelling (TS), all the fibreboards failed to meet the requirement as specified in the JIS-A-5906 standard. However, the dimensional stability of the fibreboards increases with increase quantity of plastic used. Faculty of Applied Sciences 2005 Article PeerReviewed text en http://ir.uitm.edu.my/id/eprint/11793/1/AJ_MOHD%20ARIFF%20JAMALUDIN%20SL%2005.pdf Jamaludin, Mohd Ariff and Razali Bujang, Yul Haidzir and Ramli, Ridzuan and Nordin, Kamarulzaman and Ahmad, Mansur (2005) Physical and mechanical properties of fibreboards from oil palm fibres and polyethylene / Mohd Ariff Jamaludin ... [et al.]. Science Letters, 2 (1). pp. 43-54. ISSN 1675-7785 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Teknologi MARA |
| building |
UiTM Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
Physical and theoretical chemistry Field crops |
| spellingShingle |
Physical and theoretical chemistry Field crops Jamaludin, Mohd Ariff Razali Bujang, Yul Haidzir Ramli, Ridzuan Nordin, Kamarulzaman Ahmad, Mansur Physical and mechanical properties of fibreboards from oil palm fibres and polyethylene / Mohd Ariff Jamaludin ... [et al.] |
| description |
Three different oil palm based fibreboards were used in this study, each using different types of fibres. The fibre types were frond (OPF), trunk (OPT) and empty fruit bunch (EFB). Four different plastics mixes of 0%, 5%, 12% and 20% was used for each of the fibreboard types. There were a total of twelve fibreboard types (3 fibres types X 4 polyethylene percentage content) used in this study. The fibreboards were manufactured to a targeted density of 850
kg/m3. Urea formaldehyde (UF) adhesive was used as part of the matrix at resin level of 10 percent. All the OPF boards and hybrid boards with 5% and 12% plastic content irrespective of the fibre types satisfied the 200-type board for modulus of rupture (MOR) as stated in the JIS-A-5906. The OPT boards and hybrid boards with 20% plastic content passed the JIS-A-5906 150-type board. The EFB boards only passed the JIS-A-5906 type-50 for the MOR. For Internal bonding (IB), all the fibreboards were able to meet the requirements of JIS-A-5906 type-300 board. In the case of thickness swelling (TS), all the fibreboards failed to meet the requirement as specified in the JIS-A-5906 standard. However, the dimensional stability of the fibreboards increases with increase quantity of plastic used. |
| format |
Article |
| author |
Jamaludin, Mohd Ariff Razali Bujang, Yul Haidzir Ramli, Ridzuan Nordin, Kamarulzaman Ahmad, Mansur |
| author_facet |
Jamaludin, Mohd Ariff Razali Bujang, Yul Haidzir Ramli, Ridzuan Nordin, Kamarulzaman Ahmad, Mansur |
| author_sort |
Jamaludin, Mohd Ariff |
| title |
Physical and mechanical properties of fibreboards from oil palm fibres and polyethylene / Mohd Ariff Jamaludin ... [et al.] |
| title_short |
Physical and mechanical properties of fibreboards from oil palm fibres and polyethylene / Mohd Ariff Jamaludin ... [et al.] |
| title_full |
Physical and mechanical properties of fibreboards from oil palm fibres and polyethylene / Mohd Ariff Jamaludin ... [et al.] |
| title_fullStr |
Physical and mechanical properties of fibreboards from oil palm fibres and polyethylene / Mohd Ariff Jamaludin ... [et al.] |
| title_full_unstemmed |
Physical and mechanical properties of fibreboards from oil palm fibres and polyethylene / Mohd Ariff Jamaludin ... [et al.] |
| title_sort |
physical and mechanical properties of fibreboards from oil palm fibres and polyethylene / mohd ariff jamaludin ... [et al.] |
| publisher |
Faculty of Applied Sciences |
| publishDate |
2005 |
| url |
http://ir.uitm.edu.my/id/eprint/11793/ http://ir.uitm.edu.my/id/eprint/11793/1/AJ_MOHD%20ARIFF%20JAMALUDIN%20SL%2005.pdf |
| first_indexed |
2023-09-18T22:48:33Z |
| last_indexed |
2023-09-18T22:48:33Z |
| _version_ |
1777417388714622976 |