Customized fault management system for low distribution automation system
This paper presents the development of a fault management system for distribution automation system (DAS) for operating and controlling low voltage (LV) down stream of 415/240V. The fault management system is referred as the fault detection, fault location, fault isolation, supply restoration a...
| Main Authors: | , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2008
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/8942/ http://irep.iium.edu.my/8942/1/CUSTOMIZED_FAULT_PAPER_PECON_2008_04762733.pdf |
| Summary: | This paper presents the development of a fault
management system for distribution automation system
(DAS) for operating and controlling low voltage (LV) down
stream of 415/240V. The fault management system is
referred as the fault detection, fault location, fault isolation,
supply restoration and manual control. The system is
equipped with automated equipment to detect earth fault
and overcurrent conditions. An embedded Ethernet
controller is used as remote terminal unit (RTU) to act as
converter for human machine interface (HMI)and to
interact with the digital input and output modules.
Supervisory Control and Data Acquisition (SCADA) is
integrated with RTU for automatic operating and
controlling the distribution system. The laboratory results
are compared with the simulation results to make the final
conclusion of the algorithm function properly. |
|---|