Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator

The development of the various scanning probe microscopy techniques has revolutionized the study of surface structure up to atomic scale. Among these techniques, Nanoeducator as scanning force microscope or SFM has been developed to allow the accomplishment of various measuring techniques both fo...

Full description

Bibliographic Details
Main Authors:	Edy Sutjipto, Agus Geter, Faris, Waleed Fekry, Adesta, Erry Yulian Triblas, Hanim, Hafizah
Format:	Article
Language:	English
Published:	Trans Tech Publications Ltd., Switzerland 2011
Subjects:	TA401 Materials of engineering and construction
Online Access:	http://irep.iium.edu.my/8575/ http://irep.iium.edu.my/8575/ http://irep.iium.edu.my/8575/ http://irep.iium.edu.my/8575/1/AGUS_-_Applied_Mechanics_and_Materials_2011_-_Nanoeducator.pdf

id	iium-8575
recordtype	eprints
spelling	iium-85752011-12-09T06:14:28Z http://irep.iium.edu.my/8575/ Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator Edy Sutjipto, Agus Geter Faris, Waleed Fekry Adesta, Erry Yulian Triblas Hanim, Hafizah TA401 Materials of engineering and construction The development of the various scanning probe microscopy techniques has revolutionized the study of surface structure up to atomic scale. Among these techniques, Nanoeducator as scanning force microscope or SFM has been developed to allow the accomplishment of various measuring techniques both for scanning tunneling microscope (STM) and non-contact atomic force microscope (AFM). However, there is no exact guidance how to fabricate cantilever to gather the good image. In order to achieve the better cantilever for students, this paper emphasizes on tip’s processing by altering etching length parameter as tip plays an important role to achieve better quality image during scanning operation. This paper also provides a guide for undergraduate student to know better about this machine as well as the principle behind it for them to acquire better quality image for their works. It was found that the number of turning of tungsten and etching time could produce good tip of cantilever. It is recommended for lecturers, students and technician to consider about turning and time of etching to produce a better tip of cantilever in Nanoeducator. Trans Tech Publications Ltd., Switzerland 2011-08-08 Article PeerReviewed application/pdf en http://irep.iium.edu.my/8575/1/AGUS_-_Applied_Mechanics_and_Materials_2011_-_Nanoeducator.pdf Edy Sutjipto, Agus Geter and Faris, Waleed Fekry and Adesta, Erry Yulian Triblas and Hanim, Hafizah (2011) Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator. Applied Mechanics and Materials, 84-85. pp. 392-395. ISSN 1660-9336 http://www.scientific.net/AMM.84-85.392 10.4028/www.scientific.net/AMM.84-85.392
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TA401 Materials of engineering and construction
spellingShingle	TA401 Materials of engineering and construction Edy Sutjipto, Agus Geter Faris, Waleed Fekry Adesta, Erry Yulian Triblas Hanim, Hafizah Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator
description	The development of the various scanning probe microscopy techniques has revolutionized the study of surface structure up to atomic scale. Among these techniques, Nanoeducator as scanning force microscope or SFM has been developed to allow the accomplishment of various measuring techniques both for scanning tunneling microscope (STM) and non-contact atomic force microscope (AFM). However, there is no exact guidance how to fabricate cantilever to gather the good image. In order to achieve the better cantilever for students, this paper emphasizes on tip’s processing by altering etching length parameter as tip plays an important role to achieve better quality image during scanning operation. This paper also provides a guide for undergraduate student to know better about this machine as well as the principle behind it for them to acquire better quality image for their works. It was found that the number of turning of tungsten and etching time could produce good tip of cantilever. It is recommended for lecturers, students and technician to consider about turning and time of etching to produce a better tip of cantilever in Nanoeducator.
format	Article
author	Edy Sutjipto, Agus Geter Faris, Waleed Fekry Adesta, Erry Yulian Triblas Hanim, Hafizah
author_facet	Edy Sutjipto, Agus Geter Faris, Waleed Fekry Adesta, Erry Yulian Triblas Hanim, Hafizah
author_sort	Edy Sutjipto, Agus Geter
title	Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator
title_short	Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator
title_full	Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator
title_fullStr	Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator
title_full_unstemmed	Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator
title_sort	optimum koh wet etching of cantilever tip for better image captured by nanoeducator
publisher	Trans Tech Publications Ltd., Switzerland
publishDate	2011
url	http://irep.iium.edu.my/8575/ http://irep.iium.edu.my/8575/ http://irep.iium.edu.my/8575/ http://irep.iium.edu.my/8575/1/AGUS_-_Applied_Mechanics_and_Materials_2011_-_Nanoeducator.pdf
first_indexed	2023-09-18T20:18:19Z
last_indexed	2023-09-18T20:18:19Z
_version_	1777407936954368000

Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator

Similar Items