The effect of single and double air inlets on swirling flow in a reactor of a fluidized bed gasifier
In this work, the effect of single and double air inlets on swirling flow in a reactor of fluidized bed gasifier was studied numerically. The reactor diameter (D) was 20 cm, and the reactor length was 7.5D. The geometry of the reactor bottom was conical. In order to generate swirling flow in the...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English English |
| Published: |
Penerbit Akademia Baru
2018
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/65240/ http://irep.iium.edu.my/65240/ http://irep.iium.edu.my/65240/1/65240_The%20effect%20of%20single%20and%20double%20air%20inlets.pdf http://irep.iium.edu.my/65240/2/65240_The%20effect%20of%20single%20and%20double%20air%20inlets_SCOPUS.pdf |
| Summary: | In this work, the effect of single and double air inlets on swirling flow in a reactor of
fluidized bed gasifier was studied numerically. The reactor diameter (D) was 20 cm,
and the reactor length was 7.5D. The geometry of the reactor bottom was conical. In
order to generate swirling flow in the reactor, the air inlet pipe with inner diameter of
46.8 mm was assembled tangentially to the bottom of the reactor. The comparison of
the effect of single and double air inlets were studied based on the same mass flow
rate. A 3-D numerical model of the reactor was created using a commercial software
of ANSYS Ver.15.0 (Fluent). The results showed that swirling flow at the bottom of
the reactor for the case of double inlets was more uniform than that of single inlets.
Therefore, double air inlets were applied to design and fabricate a swirling fluidized
bed gasifier. |
|---|