TIG torch technique for hard face surfacing
The hard face surface layers have been developed on alloy steel material by preplacing hybrid ceramic particles on a substrate using conventional TIG torch melting technique (known as hard face surfacing). Surface layers thickness from 0.05 to 1.0 mm is formed, which are characterized by the proces...
| Main Author: | |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2018
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/63697/ http://irep.iium.edu.my/63697/1/Invitation%20Abstract%20PPT%20slides%20Maleque.pdf |
| Summary: | The hard face surface layers have been developed on alloy steel material by preplacing hybrid ceramic particles on a substrate using conventional TIG torch melting technique (known as hard face surfacing). Surface layers thickness from 0.05 to 1.0 mm is formed, which are characterized by the process variables of heat input, particles feed rate and gas flow rate. Typical operating conditions employ TIG input energies, preplaced particle amount, gas flow rate and working distance. The hybrid composite layer was investigated by a diversity of techniques, including optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) and Microhardness testing.
This presentation demonstrates the types of surface morphology which have been produced by preplacing ceramic particles on the substrate of alloy steels and TIG melting technique and considers the effect upon these structures developed by different processing parameters which in turn change the mode of dissolution or particle reeling. Special consideration is given to the degree of hardness development on the hybrid particulate composite surface layer after re-solidification via TIG torch melting technique. |
|---|