Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles

This article presents an experimental investigation on the wear behaviour of surface alloyed duplex stainless steel (DSS) containing SiC ceramic particles using TIG melting technique. The SiC powder with 20 µm particle sizes was preplaced at 0.5 mg/mm2 and melting was conducted with energy inputs o...

Full description

Bibliographic Details
Main Authors:	Paijan, Lailatul Harina, Maleque, Md. Abdul
Format:	Conference or Workshop Item
Language:	English English
Published:	2017
Subjects:	T173.2 Technological change TN600 Metallurgy TN799.5 Nonmetallic minerals TP200 Manufacture and use of chemicals TS200 Metal manufactures. Metalworking
Online Access:	http://irep.iium.edu.my/58847/ http://irep.iium.edu.my/58847/ http://irep.iium.edu.my/58847/1/Brochure_Abstract_Book%20of%20Abstract_Program%20Schedule_ICE%20SEAM.pdf http://irep.iium.edu.my/58847/2/Mytribos_Tri05_2017.pdf

id	iium-58847
recordtype	eprints
spelling	iium-588472017-11-03T08:29:33Z http://irep.iium.edu.my/58847/ Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles Paijan, Lailatul Harina Maleque, Md. Abdul T173.2 Technological change TN600 Metallurgy TN799.5 Nonmetallic minerals TP200 Manufacture and use of chemicals TS200 Metal manufactures. Metalworking This article presents an experimental investigation on the wear behaviour of surface alloyed duplex stainless steel (DSS) containing SiC ceramic particles using TIG melting technique. The SiC powder with 20 µm particle sizes was preplaced at 0.5 mg/mm2 and melting was conducted with energy inputs of 768 and 1280 J/mm. The room temperature wear behaviour of surface alloyed SiC duplex stainless steel was carried out against alumina ceramic ball using ball-on-disc tribometer. The effect of the process parameters on the wear resistance property was evaluated in this study. The surface alloyed DSS produced hardness value of about 3~4 times higher than substrate DSS material. It was revealed that surface alloying with SiC improved wear behaviour significantly with lower wear rate and coefficient of friction than the substrate material. This is due to the formation of SiC dendrites during re-solidification process that strongly bonded to the steel which in turn reduced the friction between surface alloyed surface and the counterpart alumina ball. The wear worn surface was observed under SEM with a very mild abrasive wear for surface alloyed DSS as compared to severe abrasive wear for DSS substrate surface. Moreover, surface alloyed DSS showed lower surface roughness and wear depth penetration indicating better wear behaviour of the sample. It can be concluded that the TIG torch melted surface alloyed DSS containing SiC can significantly improve the wear resistance of the material. 2017-10 Conference or Workshop Item NonPeerReviewed application/pdf en http://irep.iium.edu.my/58847/1/Brochure_Abstract_Book%20of%20Abstract_Program%20Schedule_ICE%20SEAM.pdf application/pdf en http://irep.iium.edu.my/58847/2/Mytribos_Tri05_2017.pdf Paijan, Lailatul Harina and Maleque, Md. Abdul (2017) Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles. In: The 5th International Conference and Exhibition On Energy and Advanced Materials (ICE-SEAM2017), 16th-19th Oct. 2017, Melaka. http://iceseam2017.utem.edu.my/
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English English
topic	T173.2 Technological change TN600 Metallurgy TN799.5 Nonmetallic minerals TP200 Manufacture and use of chemicals TS200 Metal manufactures. Metalworking
spellingShingle	T173.2 Technological change TN600 Metallurgy TN799.5 Nonmetallic minerals TP200 Manufacture and use of chemicals TS200 Metal manufactures. Metalworking Paijan, Lailatul Harina Maleque, Md. Abdul Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles
description	This article presents an experimental investigation on the wear behaviour of surface alloyed duplex stainless steel (DSS) containing SiC ceramic particles using TIG melting technique. The SiC powder with 20 µm particle sizes was preplaced at 0.5 mg/mm2 and melting was conducted with energy inputs of 768 and 1280 J/mm. The room temperature wear behaviour of surface alloyed SiC duplex stainless steel was carried out against alumina ceramic ball using ball-on-disc tribometer. The effect of the process parameters on the wear resistance property was evaluated in this study. The surface alloyed DSS produced hardness value of about 3~4 times higher than substrate DSS material. It was revealed that surface alloying with SiC improved wear behaviour significantly with lower wear rate and coefficient of friction than the substrate material. This is due to the formation of SiC dendrites during re-solidification process that strongly bonded to the steel which in turn reduced the friction between surface alloyed surface and the counterpart alumina ball. The wear worn surface was observed under SEM with a very mild abrasive wear for surface alloyed DSS as compared to severe abrasive wear for DSS substrate surface. Moreover, surface alloyed DSS showed lower surface roughness and wear depth penetration indicating better wear behaviour of the sample. It can be concluded that the TIG torch melted surface alloyed DSS containing SiC can significantly improve the wear resistance of the material.
format	Conference or Workshop Item
author	Paijan, Lailatul Harina Maleque, Md. Abdul
author_facet	Paijan, Lailatul Harina Maleque, Md. Abdul
author_sort	Paijan, Lailatul Harina
title	Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles
title_short	Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles
title_full	Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles
title_fullStr	Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles
title_full_unstemmed	Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles
title_sort	wear behaviour of surface alloyed duplex stainless steel containing sic ceramic particles
publishDate	2017
url	http://irep.iium.edu.my/58847/ http://irep.iium.edu.my/58847/ http://irep.iium.edu.my/58847/1/Brochure_Abstract_Book%20of%20Abstract_Program%20Schedule_ICE%20SEAM.pdf http://irep.iium.edu.my/58847/2/Mytribos_Tri05_2017.pdf
first_indexed	2023-09-18T21:23:16Z
last_indexed	2023-09-18T21:23:16Z
_version_	1777412023502503936

Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles

Similar Items