Extraction of caustic potash from spent tea for biodiesel production

Biodiesel is an alternative to non-renewable fossil fuels due to its low gas emission and economical value. This study aims to extract caustic potash (KOH) from spent tea and to optimize the transesterfication process based on parameters such as amount of catalyst, reaction temperature and methanol...

Full description

Bibliographic Details
Main Authors: Sulaiman, Sarina, Che Fisol, Ahmad Faiz, Mohamed Sharikh, Atikah
Format: Conference or Workshop Item
Language:English
English
English
English
Published: Institute of Physics Publishing 2018
Subjects:
Online Access:http://irep.iium.edu.my/57744/
http://irep.iium.edu.my/57744/
http://irep.iium.edu.my/57744/
http://irep.iium.edu.my/57744/19/57744.pdf
http://irep.iium.edu.my/57744/25/57744_Extraction%20of%20caustic%20potash%20from%20spent%20tea_Conference%20article.pdf
http://irep.iium.edu.my/57744/26/57744_Extraction%20of%20caustic%20potash%20from%20spent%20tea_scopus.pdf
http://irep.iium.edu.my/57744/37/57744_Extraction%20of%20caustic%20potash%20from%20spent%20tea%20for%20biodiesel%20Production_WoS.pdf
Description
Summary:Biodiesel is an alternative to non-renewable fossil fuels due to its low gas emission and economical value. This study aims to extract caustic potash (KOH) from spent tea and to optimize the transesterfication process based on parameters such as amount of catalyst, reaction temperature and methanol to oil ratio. The spent tea was first dried at 60°C prior to calcination at 600°C for two hours. Caustic Potash were extracted from the calcined spent tea. The transesterification process was done based on Design of Experiments (DOE) to study the effects of amount of catalyst ranging from 0.5 wt % to 2.5 wt %, reaction temperature from 55°C to 65°C and methanol to oil ratio from 6:1 to 12:1 at a constant agitation rate of 300 rpm for three hours. The calcined spent tea produced was recorded the highest at 54.3 wt % and the extracted catalyst was 2.4 wt %. The optimized biodiesel yield recorded was 56.95% at the optimal conditions of 2.5 wt % amount of catalyst, 65°C reaction temperature and 9:1 methanol to oil ratio.