Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach

The use of a tungsten inert gas (TIG) welding torch heat source has resulted in the development of an economical route for surface modification of engineering parts, giving similar results to the more expensive high power laser technique. In this study, ceramic-based embedded composite coating has b...

Full description

Bibliographic Details
Main Authors:	Maleque, Md. Abdul, Bello, Kamil Adeyemi, Salim, Nur Akma
Format:	Conference or Workshop Item
Language:	English
Published:	2016
Subjects:	T11.95 Industrial directories TA401 Materials of engineering and construction TN600 Metallurgy
Online Access:	http://irep.iium.edu.my/51663/ http://irep.iium.edu.my/51663/ http://irep.iium.edu.my/51663/1/51663_Wear_behaviour_optimization_of_TIG_parameters.pdf

id	iium-51663
recordtype	eprints
spelling	iium-516632016-08-18T06:02:52Z http://irep.iium.edu.my/51663/ Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach Maleque, Md. Abdul Bello, Kamil Adeyemi Salim, Nur Akma T11.95 Industrial directories TA401 Materials of engineering and construction TN600 Metallurgy The use of a tungsten inert gas (TIG) welding torch heat source has resulted in the development of an economical route for surface modification of engineering parts, giving similar results to the more expensive high power laser technique. In this study, ceramic-based embedded composite coating has been produced by precoated silicon carbide (SiC) powders on the AISI 4340 low alloy steel substrate using TIG welding torch process. A design of experiment based on Taguchi approach has been adopted to optimize the TIG cladding process parameters. The L9 orthogonal array and the signal-to-noise was used to study the effect of TIG welding parameters such as arc current, travelling speed, welding voltage and argon flow rate on tribological response behaviour (wear rate, surface roughness and wear track width). The objective of the study was to identify optimal design parameter that significantly minimizes each of the surface quality characteristics. The analysis of the experimental results revealed that the argon flow rate was found to be the most influential factor contributing to the minimum wear and surface roughness of the modified coating surface. On the other hand, the key factor in reducing wear scar is the welding voltage. Finally, a convenient and economical Taguchi approach used in this study was efficient to find out optimal factor settings for obtaining minimum wear rate, wear scar and surface roughness responses in TIG-coated surfaces. 2016-07 Conference or Workshop Item NonPeerReviewed application/pdf en http://irep.iium.edu.my/51663/1/51663_Wear_behaviour_optimization_of_TIG_parameters.pdf Maleque, Md. Abdul and Bello, Kamil Adeyemi and Salim, Nur Akma (2016) Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished) http://www.iium.edu.my/icmaae/2016/
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	T11.95 Industrial directories TA401 Materials of engineering and construction TN600 Metallurgy
spellingShingle	T11.95 Industrial directories TA401 Materials of engineering and construction TN600 Metallurgy Maleque, Md. Abdul Bello, Kamil Adeyemi Salim, Nur Akma Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach
description	The use of a tungsten inert gas (TIG) welding torch heat source has resulted in the development of an economical route for surface modification of engineering parts, giving similar results to the more expensive high power laser technique. In this study, ceramic-based embedded composite coating has been produced by precoated silicon carbide (SiC) powders on the AISI 4340 low alloy steel substrate using TIG welding torch process. A design of experiment based on Taguchi approach has been adopted to optimize the TIG cladding process parameters. The L9 orthogonal array and the signal-to-noise was used to study the effect of TIG welding parameters such as arc current, travelling speed, welding voltage and argon flow rate on tribological response behaviour (wear rate, surface roughness and wear track width). The objective of the study was to identify optimal design parameter that significantly minimizes each of the surface quality characteristics. The analysis of the experimental results revealed that the argon flow rate was found to be the most influential factor contributing to the minimum wear and surface roughness of the modified coating surface. On the other hand, the key factor in reducing wear scar is the welding voltage. Finally, a convenient and economical Taguchi approach used in this study was efficient to find out optimal factor settings for obtaining minimum wear rate, wear scar and surface roughness responses in TIG-coated surfaces.
format	Conference or Workshop Item
author	Maleque, Md. Abdul Bello, Kamil Adeyemi Salim, Nur Akma
author_facet	Maleque, Md. Abdul Bello, Kamil Adeyemi Salim, Nur Akma
author_sort	Maleque, Md. Abdul
title	Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach
title_short	Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach
title_full	Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach
title_fullStr	Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach
title_full_unstemmed	Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach
title_sort	wear behaviour optimization of tig parameters on wear behavior of sic embedded coatings using taguchi approach
publishDate	2016
url	http://irep.iium.edu.my/51663/ http://irep.iium.edu.my/51663/ http://irep.iium.edu.my/51663/1/51663_Wear_behaviour_optimization_of_TIG_parameters.pdf
first_indexed	2023-09-18T21:13:11Z
last_indexed	2023-09-18T21:13:11Z
_version_	1777411388669427712

Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach

Similar Items