Synthesis of ZnO nanostructures using sol-gel method

Zinc oxide plays an important role in current industry due to its special characteristics such as anti-corrosion, anti-bacteria, has low electrons conductivity and excellent heat resistance. Therefore, the objective of this study is to synthesize zinc oxide nanostructures with the most practical way...

Full description

Bibliographic Details
Main Authors:	J.N, Nor Hasnidawani, Hassan, Noor Azlina, Hassan, Norita, Bonnia, Noor Najmi, Ratim, Suzana, E. S., Ali
Format:	Conference or Workshop Item
Language:	English
Published:	Elsevier B.V. 2016
Subjects:	TP200 Manufacture and use of chemicals
Online Access:	http://irep.iium.edu.my/50653/ http://irep.iium.edu.my/50653/ http://irep.iium.edu.my/50653/ http://irep.iium.edu.my/50653/1/50653.pdf

id	iium-50653
recordtype	eprints
spelling	iium-506532018-06-06T03:23:09Z http://irep.iium.edu.my/50653/ Synthesis of ZnO nanostructures using sol-gel method J.N, Nor Hasnidawani Hassan, Noor Azlina Hassan, Norita Bonnia, Noor Najmi Ratim, Suzana E. S., Ali TP200 Manufacture and use of chemicals Zinc oxide plays an important role in current industry due to its special characteristics such as anti-corrosion, anti-bacteria, has low electrons conductivity and excellent heat resistance. Therefore, the objective of this study is to synthesize zinc oxide nanostructures with the most practical ways by using sol-gel method and characterize the nanostructures. Sol-gel method is the simplest method and has the ability to control the particle size and morphology through systematic monitoring of reaction parameters. ZnO nanoparticles were synthesized via sol gel method using Zinc acetate dehydrate (Zn(CH3COO)2.2H2O) as a precursor and ethanol (CH2COOH) was used as solvent, Sodium hydroxide (NaOH) and distilled water were used as medium. ZnO nanoparticles were characterized by using XRD, EDX, FESEM, and nano-particles analyser. Result of EDX characterization shows that the ZnO nanoparticles has good purity with (Zinc content of- 55.38% and; Oxygen content of- 44.62%). XRD result spectrum displays mainly oxygen and zinc peaks, which indicate the crystallinity in nature as exhibited. FESEM micrographs shows that synthesized ZnO have a rod-like structure. The obtained ZnO nanoparticles are homogenous and consistent in size which corresponds to the XRD result that exhibit good crystallinity. ZnO nanoparticles were successfully synthesized by sol-gel method in nanosize range within 81.28 nm to 84.98 nm. Elsevier B.V. 2016 Conference or Workshop Item PeerReviewed application/pdf en http://irep.iium.edu.my/50653/1/50653.pdf J.N, Nor Hasnidawani and Hassan, Noor Azlina and Hassan, Norita and Bonnia, Noor Najmi and Ratim, Suzana and E. S., Ali (2016) Synthesis of ZnO nanostructures using sol-gel method. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP), 4th-6th August 2015, Penang, Malaysia. https://www.sciencedirect.com/science/article/pii/S1876619616001418 10.1016/j.proche.2016.03.095
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TP200 Manufacture and use of chemicals
spellingShingle	TP200 Manufacture and use of chemicals J.N, Nor Hasnidawani Hassan, Noor Azlina Hassan, Norita Bonnia, Noor Najmi Ratim, Suzana E. S., Ali Synthesis of ZnO nanostructures using sol-gel method
description	Zinc oxide plays an important role in current industry due to its special characteristics such as anti-corrosion, anti-bacteria, has low electrons conductivity and excellent heat resistance. Therefore, the objective of this study is to synthesize zinc oxide nanostructures with the most practical ways by using sol-gel method and characterize the nanostructures. Sol-gel method is the simplest method and has the ability to control the particle size and morphology through systematic monitoring of reaction parameters. ZnO nanoparticles were synthesized via sol gel method using Zinc acetate dehydrate (Zn(CH3COO)2.2H2O) as a precursor and ethanol (CH2COOH) was used as solvent, Sodium hydroxide (NaOH) and distilled water were used as medium. ZnO nanoparticles were characterized by using XRD, EDX, FESEM, and nano-particles analyser. Result of EDX characterization shows that the ZnO nanoparticles has good purity with (Zinc content of- 55.38% and; Oxygen content of- 44.62%). XRD result spectrum displays mainly oxygen and zinc peaks, which indicate the crystallinity in nature as exhibited. FESEM micrographs shows that synthesized ZnO have a rod-like structure. The obtained ZnO nanoparticles are homogenous and consistent in size which corresponds to the XRD result that exhibit good crystallinity. ZnO nanoparticles were successfully synthesized by sol-gel method in nanosize range within 81.28 nm to 84.98 nm.
format	Conference or Workshop Item
author	J.N, Nor Hasnidawani Hassan, Noor Azlina Hassan, Norita Bonnia, Noor Najmi Ratim, Suzana E. S., Ali
author_facet	J.N, Nor Hasnidawani Hassan, Noor Azlina Hassan, Norita Bonnia, Noor Najmi Ratim, Suzana E. S., Ali
author_sort	J.N, Nor Hasnidawani
title	Synthesis of ZnO nanostructures using sol-gel method
title_short	Synthesis of ZnO nanostructures using sol-gel method
title_full	Synthesis of ZnO nanostructures using sol-gel method
title_fullStr	Synthesis of ZnO nanostructures using sol-gel method
title_full_unstemmed	Synthesis of ZnO nanostructures using sol-gel method
title_sort	synthesis of zno nanostructures using sol-gel method
publisher	Elsevier B.V.
publishDate	2016
url	http://irep.iium.edu.my/50653/ http://irep.iium.edu.my/50653/ http://irep.iium.edu.my/50653/ http://irep.iium.edu.my/50653/1/50653.pdf
first_indexed	2023-09-18T21:11:36Z
last_indexed	2023-09-18T21:11:36Z
_version_	1777411289360891904

Synthesis of ZnO nanostructures using sol-gel method

Similar Items