Novel activated Ni-P-hBN composite powder for efficient solid lubricant coating application
As new technologies evolve, new demands are created for protective coatings which are required to have stability over a range of quite aggressive service conditions. For instance, the surfaces of shafts, bearings and steam turbine blades for use in turbine engines are to be protected against daunt...
Main Author: | Maleque, Md. Abdul |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2015
|
Subjects: | |
Online Access: | http://irep.iium.edu.my/48805/ http://irep.iium.edu.my/48805/1/PECIPTA15_Silver.pdf |
Similar Items
-
Surface features of TIG melting coated CP-titanium
by: Adeleke, S.A., et al.
Published: (2015) -
Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique
by: Maleque, Md. Abdul, et al.
Published: (2013) -
Tungsten inert gas surface alloying of commercial purity titanium (CP-Ti) with Fe-C-Si ternary mixtures
by: Adeleke, S.A., et al.
Published: (2014) -
Hard surface layer formation on duplex stainless steel using melting and diffusion processes: a review
by: Paijan, Lailatul Harina, et al.
Published: (2016) -
Thin surface layers of iron-based alloys deposited by TIG hardfacing
by: Sakiru, Adeleke, et al.
Published: (2015)