Design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application

Design of rectangular microstrip patch antenna (RMPA) using stepped cut at four corners for broadband/multiband application is presented in this paper. Stepped cut at four corner technique is used in order to increase the bandwidth and gain of the antenna. Design and simulation of Modified rectang...

Full description

Bibliographic Details
Main Authors:	Abdulrab, Waheeb Salim, Islam, Md. Rafiqul, Habaebi, Mohamed Hadi
Format:	Article
Language:	English
Published:	Asian Research Publishing Network (ARPN) 2015
Subjects:	TK5101 Telecommunication. Including telegraphy, radio, radar, television
Online Access:	http://irep.iium.edu.my/46575/ http://irep.iium.edu.my/46575/ http://irep.iium.edu.my/46575/1/jeas_1215_3161.pdf

id	iium-46575
recordtype	eprints
spelling	iium-465752016-05-12T02:08:12Z http://irep.iium.edu.my/46575/ Design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application Abdulrab, Waheeb Salim Islam, Md. Rafiqul Habaebi, Mohamed Hadi TK5101 Telecommunication. Including telegraphy, radio, radar, television Design of rectangular microstrip patch antenna (RMPA) using stepped cut at four corners for broadband/multiband application is presented in this paper. Stepped cut at four corner technique is used in order to increase the bandwidth and gain of the antenna. Design and simulation of Modified rectangular microstrip patch antenna are done by CST Microwave Studio software. Four stages are presented for the proposed broadband MRMPA design. The first stage is a single mode RMPA and by increasing steps at the corner of the patch antenna a dual band, multiband and broadband are obtained. As the steps are increased, the antenna's operating bandwidth is also enhanced. The frequencies ranges of this design vary from 900MHZ to 3.5 GHz. Hence this design can be used for GSM (900MHz/1.5GHz), WiFi (2.4GHz), LTE (2.6GHz) and WiMax (3.5 GHz) applications. Asian Research Publishing Network (ARPN) 2015-12-10 Article PeerReviewed application/pdf en http://irep.iium.edu.my/46575/1/jeas_1215_3161.pdf Abdulrab, Waheeb Salim and Islam, Md. Rafiqul and Habaebi, Mohamed Hadi (2015) Design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17265-17269. ISSN 1819-6608 http://www.arpnjournals.com/jeas/index.htm
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TK5101 Telecommunication. Including telegraphy, radio, radar, television
spellingShingle	TK5101 Telecommunication. Including telegraphy, radio, radar, television Abdulrab, Waheeb Salim Islam, Md. Rafiqul Habaebi, Mohamed Hadi Design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application
description	Design of rectangular microstrip patch antenna (RMPA) using stepped cut at four corners for broadband/multiband application is presented in this paper. Stepped cut at four corner technique is used in order to increase the bandwidth and gain of the antenna. Design and simulation of Modified rectangular microstrip patch antenna are done by CST Microwave Studio software. Four stages are presented for the proposed broadband MRMPA design. The first stage is a single mode RMPA and by increasing steps at the corner of the patch antenna a dual band, multiband and broadband are obtained. As the steps are increased, the antenna's operating bandwidth is also enhanced. The frequencies ranges of this design vary from 900MHZ to 3.5 GHz. Hence this design can be used for GSM (900MHz/1.5GHz), WiFi (2.4GHz), LTE (2.6GHz) and WiMax (3.5 GHz) applications.
format	Article
author	Abdulrab, Waheeb Salim Islam, Md. Rafiqul Habaebi, Mohamed Hadi
author_facet	Abdulrab, Waheeb Salim Islam, Md. Rafiqul Habaebi, Mohamed Hadi
author_sort	Abdulrab, Waheeb Salim
title	Design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application
title_short	Design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application
title_full	Design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application
title_fullStr	Design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application
title_full_unstemmed	Design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application
title_sort	design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application
publisher	Asian Research Publishing Network (ARPN)
publishDate	2015
url	http://irep.iium.edu.my/46575/ http://irep.iium.edu.my/46575/ http://irep.iium.edu.my/46575/1/jeas_1215_3161.pdf
first_indexed	2023-09-18T21:06:18Z
last_indexed	2023-09-18T21:06:18Z
_version_	1777410956481003520

Design of rectangular microstrip patch antenna using stepped cut at four corners for broadband/multiband application

Similar Items