Chatter control in induction heat assisted end milling: to improve machinability of stainless steel and medium carbon steels

Chatter control in induction heat assisted end milling: to improve machinability of stainless steel and medium carbon steels

Bibliographic Details
Main Authors:	Amin, A. K. M. Nurul, Mahmoud, Abdelgadir Mohamed
Format:	Book
Language:	English
Published:	LAP LAMBERT Academic Publishing 2013
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://irep.iium.edu.my/36712/ http://irep.iium.edu.my/36712/1/Chatter_Control_in_Induction_Heat_Assisted_End_Milling.pdf

Similar Items

Application of permanent electromagnet for chatter control in end milling of medium carbon steel
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Induction heat assisted end milling of Inconel 718 and Ti6AI4V alloys: a comparative assessment of Machinability in terms of chatter, surface roughness and tool performance
by: Amin, A. K. M. Nurul, et al.
Published: (2013)

Response surface methodological approach for the prediction of tangential cutting forces in end milling of stainless steel
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2008)

Resistance spot welding of stainless steel and mild steel
by: Wan Muhammad Hafizi , Wan Hassan
Published: (2012)

A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45)
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2010)

Investigation of chatter arising during end milling operation on VMC and quality of machined surface
by: Nurul Amin, A.K.M, et al.
Published: (2011)

Strength investigation on resistance spot welding of low carbon steel and stainless steel
by: Mohd Nur Syaffiq, Mahmood
Published: (2013)

The effect of preheating of work on chatter during end milling of medium carbon steel performed on a Vertical Machining Center (VMC)
by: Amin, A. K. M. Nurul, et al.
Published: (2003)

Effect of cryogenic cooling during grinding of mild steel and stainless steel
by: Khan, Ahsan Ali, et al.
Published: (2009)

Investigation of mig welding on dissimilar thickness of metal sheets (steel and stainless steel)
by: Mohd Iqbal, Abd Razak
Published: (2012)

Electrochemical study of heat treated SS304 stainless steel is simulated body fluid
by: Nik Mohd Nazairen, Nik Cob
Published: (2010)

Corrosion behaviour of heat threated carbon steel
by: Mohamad Zaki, Hamsah
Published: (2012)

A new method for chatter suppression and improvement of surface roughness in end milling of mild steel
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Experimental and finite element evaluation of bending for stainless steel
by: Mohamad Jazmir Hassan, Mohamed
Published: (2012)

Comparison of erosion corrosion of titanium and stainless steel in seawater
by: Mohamad Izwan, Abdul Ghani
Published: (2012)

Effect of heat treatment on the corrosion behavior of SS316 stainless steel in simulated body environment
by: Mohd Asyraf, Che Azmi
Published: (2010)

Machinability of AISI304 stainless steel using Ethylene Glycol nano particles based coolant
by: Yogeswaran , Muthusamy
Published: (2015)

Investigation of Chip and Surface Roughness when Milling AISI304 Stainless Steel
by: K., Kadirgama
Published: (2017)

A study on heat treatment of carburizing carbon steel
by: Mohd Marhan, Asari
Published: (2010)

Role of chip serration frequency in chatter formation during end milling operation of stainless steel
by: Anayet Ullah Patwari, Mohammed, et al.
Published: (2010)

Development of a mathematical model for the prediction of surface roughness in end milling of stainless steel SS 304
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Hot machining in end milling of hardened steel AISI D2
by: Lajis, M. A., et al.
Published: (2008)

Investigations of the causes of chatter in computer aided manufacturing process during end milling operation
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2011)

Artificial neural network chip serration frequency model in end milling of medium carbon steel
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2009)

Enhancement of machinability of Inconel 718 in end milling through online induction heating of workpiece
by: Amin, A. K. M. Nurul, et al.
Published: (2012)

Micro end milling of AISI 304 stainless steel and analysis of micro surface roughness
by: Ali, Mohammad Yeakub, et al.
Published: (2009)

Investigation of chloride stress corrosion cracking in austenitic stainless steel
by: Mohamad Khairuazlan, Kamaruzaman
Published: (2013)

Investigation of corrosion effects on aluminum-stainless steel weld joint
by: Nurul Asmida, Kamaruddin
Published: (2012)

Study of geometric effect to the crevice corrosion behaviour in stainless steel
by: Neena Kaylisia, Brum
Published: (2013)

Investigation on mechanical properties of heat treated low carbon steel
by: Abd Hisham, Mohamad
Published: (2008)

Preheated machining in end milling of hardened steel AISI D2
by: Lajis, M. A., et al.
Published: (2008)

Fatigue crack growth analysis of stainless steel under mode 1
by: Ahmad Azam Azizan, Azlan
Published: (2010)

Influence of cutting parameters on chatter and tool wear during end milling of stainless steel conducted on VMC
by: Amin, A. K. M. Nurul, et al.
Published: (2002)

Tool wear and surface roughness aspects in heat assisted end milling of AISI D2 hardened steel
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Carbon diffusion in 304I austenitic stainless steel at 650 steel at 650 -750°c in carburizing environment
by: Mohamed Haider, Farag I., et al.
Published: (2019)

Vibration analysis of resistance spot welding joint for dissimilar plate structure (mild steel 1010 and stainless steel 304)
by: M. S. M., Sani, et al.
Published: (2017)

Fatigue life prediction on heat treated low carbon steel and aluminium
by: Mohd Ihsan, Ab Rahim
Published: (2012)

The method of chatter suppression in end milling operation
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Chip formation and coefficient of friction in turning S45C medium carbon steel
by: A. Raof, Natasha, et al.
Published: (2014)

A statistical approach for the prediction of cutting forces in end milling of medium carbon steel (S45C)
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2008)

Cannot write session to /tmp/vufind_sessions/sess_m1obvb5hll2c291c86sj8503bl