Cooling of motorcyclist helmet with thermoelectric module

This paper deals with the development of cooling system for motorcycle helmet using thermoelectric technology. The system consists mainly of a heat sink and thermoelectric module. When electrical voltage is applied to the thermoelectric module, it will create a temperature difference across the ther...

Full description

Bibliographic Details
Main Authors:	Hrairi, Meftah, Abdullah, Abdullah F., Ahmed, Mirghani Ishak
Format:	Article
Language:	English
Published:	IDOSI Publications 2013
Subjects:	TJ163.26 Energy conservation TJ807 Renewable energy sources
Online Access:	http://irep.iium.edu.my/32057/ http://irep.iium.edu.my/32057/ http://irep.iium.edu.my/32057/ http://irep.iium.edu.my/32057/1/16.pdf

id	iium-32057
recordtype	eprints
spelling	iium-320572013-09-30T04:32:01Z http://irep.iium.edu.my/32057/ Cooling of motorcyclist helmet with thermoelectric module Hrairi, Meftah Abdullah, Abdullah F. Ahmed, Mirghani Ishak TJ163.26 Energy conservation TJ807 Renewable energy sources This paper deals with the development of cooling system for motorcycle helmet using thermoelectric technology. The system consists mainly of a heat sink and thermoelectric module. When electrical voltage is applied to the thermoelectric module, it will create a temperature difference across the thermoelectric module. This phenomenon is also known as Peltier effect, is being used to utilize electricity to pump heat. The prototype had been fabricated and mounted onto a motorcycle helmet. The designed thermoelectric cooled helmet was simulated using the finite element software ANSYS as well as experimentally tested for the cooling purpose. Experiments are conducted on the prototype to analyze the performance of the cooling system. The numerical and experimental results showed a good agreement and indicated that the temperature inside the helmet was reduced from 25.5°C to 19.3°C in approximately 6 min. IDOSI Publications 2013 Article PeerReviewed application/pdf en http://irep.iium.edu.my/32057/1/16.pdf Hrairi, Meftah and Abdullah, Abdullah F. and Ahmed, Mirghani Ishak (2013) Cooling of motorcyclist helmet with thermoelectric module. Middle-East Journal of Scientific Research, 13. pp. 103-108. ISSN 1990-9233 http://www.idosi.org/mejsr/mejsr13%28mae%2913/16.pdf 10.5829/idosi.mejsr.2013.13.mae.10001
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TJ163.26 Energy conservation TJ807 Renewable energy sources
spellingShingle	TJ163.26 Energy conservation TJ807 Renewable energy sources Hrairi, Meftah Abdullah, Abdullah F. Ahmed, Mirghani Ishak Cooling of motorcyclist helmet with thermoelectric module
description	This paper deals with the development of cooling system for motorcycle helmet using thermoelectric technology. The system consists mainly of a heat sink and thermoelectric module. When electrical voltage is applied to the thermoelectric module, it will create a temperature difference across the thermoelectric module. This phenomenon is also known as Peltier effect, is being used to utilize electricity to pump heat. The prototype had been fabricated and mounted onto a motorcycle helmet. The designed thermoelectric cooled helmet was simulated using the finite element software ANSYS as well as experimentally tested for the cooling purpose. Experiments are conducted on the prototype to analyze the performance of the cooling system. The numerical and experimental results showed a good agreement and indicated that the temperature inside the helmet was reduced from 25.5°C to 19.3°C in approximately 6 min.
format	Article
author	Hrairi, Meftah Abdullah, Abdullah F. Ahmed, Mirghani Ishak
author_facet	Hrairi, Meftah Abdullah, Abdullah F. Ahmed, Mirghani Ishak
author_sort	Hrairi, Meftah
title	Cooling of motorcyclist helmet with thermoelectric module
title_short	Cooling of motorcyclist helmet with thermoelectric module
title_full	Cooling of motorcyclist helmet with thermoelectric module
title_fullStr	Cooling of motorcyclist helmet with thermoelectric module
title_full_unstemmed	Cooling of motorcyclist helmet with thermoelectric module
title_sort	cooling of motorcyclist helmet with thermoelectric module
publisher	IDOSI Publications
publishDate	2013
url	http://irep.iium.edu.my/32057/ http://irep.iium.edu.my/32057/ http://irep.iium.edu.my/32057/ http://irep.iium.edu.my/32057/1/16.pdf
first_indexed	2023-09-18T20:46:15Z
last_indexed	2023-09-18T20:46:15Z
_version_	1777409694798708736

Cooling of motorcyclist helmet with thermoelectric module

Similar Items