Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique

In the present study, a surface layer of TiC-CNT hybrid compositecoating has been developed on low alloy steel (LAS) by using powder preplacement and tungsten inert gas (TIG) torch melting techniques.The weighed powder mixture with the content of 1.0 mg per millimeter square area and containing T...

Full description

Bibliographic Details
Main Authors:	Maleque, Md. Abdul, Bello, K. A, Md Idriss, Ahmed Nazrin, Mirdha, S.
Format:	Article
Language:	English
Published:	Trans Tech Publications Ltd., Switzerland 2013
Subjects:	TA401 Materials of engineering and construction TN600 Metallurgy TS200 Metal manufactures. Metalworking
Online Access:	http://irep.iium.edu.my/30828/ http://irep.iium.edu.my/30828/1/P76_2013_Bello.pdf

id	iium-30828
recordtype	eprints
spelling	iium-308282013-07-25T01:33:29Z http://irep.iium.edu.my/30828/ Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique Maleque, Md. Abdul Bello, K. A Md Idriss, Ahmed Nazrin Mirdha, S. TA401 Materials of engineering and construction TN600 Metallurgy TS200 Metal manufactures. Metalworking In the present study, a surface layer of TiC-CNT hybrid compositecoating has been developed on low alloy steel (LAS) by using powder preplacement and tungsten inert gas (TIG) torch melting techniques.The weighed powder mixture with the content of 1.0 mg per millimeter square area and containing TiC- 4wt. % CNT particles was preplaced on LAS surfaces using a suitable binder and then melted under the TIG arc with an operating current of 100 A and energy input of 1440 J/mm. The microstructural and microhardness characteristics of the processed composites coating were analyzed using SEM, EDXand Vickers microhardness testers. Under the melting condition used in this investigation, the arc completely dissolved the composite powder mixture that resolidifiedinto a melt track with radial marks and smooth surfaces. Themelt cross sections were hemispherical in shape and produced 1 mm deep hard coating layer which were free from porosity and cracks. SEM micrographs TiC-CNT hybrid coated surface glazed at 100A consists of fineprecipitated TiC in form globular and cubic dendrites and this is the reason for hardness increment to an average of three times greater than that of substrate value. The result obtained indicated that TIG arc melting process is applicable to generate resolidified layer of precipitated TiC microstructure with uniformly distribution in the coating region. Trans Tech Publications Ltd., Switzerland 2013 Article PeerReviewed application/pdf en http://irep.iium.edu.my/30828/1/P76_2013_Bello.pdf Maleque, Md. Abdul and Bello, K. A and Md Idriss, Ahmed Nazrin and Mirdha, S. (2013) Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique. Applied Mechanics and Materials, 378. pp. 259-264. ISSN 1660-9336
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TA401 Materials of engineering and construction TN600 Metallurgy TS200 Metal manufactures. Metalworking
spellingShingle	TA401 Materials of engineering and construction TN600 Metallurgy TS200 Metal manufactures. Metalworking Maleque, Md. Abdul Bello, K. A Md Idriss, Ahmed Nazrin Mirdha, S. Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique
description	In the present study, a surface layer of TiC-CNT hybrid compositecoating has been developed on low alloy steel (LAS) by using powder preplacement and tungsten inert gas (TIG) torch melting techniques.The weighed powder mixture with the content of 1.0 mg per millimeter square area and containing TiC- 4wt. % CNT particles was preplaced on LAS surfaces using a suitable binder and then melted under the TIG arc with an operating current of 100 A and energy input of 1440 J/mm. The microstructural and microhardness characteristics of the processed composites coating were analyzed using SEM, EDXand Vickers microhardness testers. Under the melting condition used in this investigation, the arc completely dissolved the composite powder mixture that resolidifiedinto a melt track with radial marks and smooth surfaces. Themelt cross sections were hemispherical in shape and produced 1 mm deep hard coating layer which were free from porosity and cracks. SEM micrographs TiC-CNT hybrid coated surface glazed at 100A consists of fineprecipitated TiC in form globular and cubic dendrites and this is the reason for hardness increment to an average of three times greater than that of substrate value. The result obtained indicated that TIG arc melting process is applicable to generate resolidified layer of precipitated TiC microstructure with uniformly distribution in the coating region.
format	Article
author	Maleque, Md. Abdul Bello, K. A Md Idriss, Ahmed Nazrin Mirdha, S.
author_facet	Maleque, Md. Abdul Bello, K. A Md Idriss, Ahmed Nazrin Mirdha, S.
author_sort	Maleque, Md. Abdul
title	Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique
title_short	Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique
title_full	Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique
title_fullStr	Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique
title_full_unstemmed	Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique
title_sort	processing of tic-cnt hybrid composite coating on low alloy steel using tig torch technique
publisher	Trans Tech Publications Ltd., Switzerland
publishDate	2013
url	http://irep.iium.edu.my/30828/ http://irep.iium.edu.my/30828/1/P76_2013_Bello.pdf
first_indexed	2023-09-18T20:45:04Z
last_indexed	2023-09-18T20:45:04Z
_version_	1777409619999588352

Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique

Similar Items