Tool Life Prediction by Response Surface Methodology for End Milling Titanium Alloy Ti-6Al-4V Using PCD Inserts
This paper presents an approach to establish models for tool life in end milling of titanium alloy Ti-6AI-4V using PCD inserts under dry conditions. Small central composite design (CCD) was employed in developing the tool life model in relation to primary cutting parameters such as cutting speed, ax...
Main Authors: | Ginta , Turnad L., Amin, A. K. M. Nurul, Karim, A.N. Mustafizul, Lajis, M. A. |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2008
|
Subjects: | |
Online Access: | http://irep.iium.edu.my/26890/ http://irep.iium.edu.my/26890/1/TL_PCD_%2327.pdf |
Similar Items
-
Modeling for surface roughness in end-milling of titanium alloy Ti-6AI-4V using uncoated WC-Co and PCD Inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2007) -
Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts
by: Ginta, Turnad Lenggo, et al.
Published: (2007) -
Surface roughness models for end milling titanium alloy TI-6AL-4V under room temperature and preheated machining
by: Ginta, Turnad Lenggo, et al.
Published: (2009) -
Surface roughness and surface integrity of end milled titanium alloy TI-6AL-4V at room temperature and preheated machining
by: Ginta, Turnad Lenggo, et al.
Published: (2009) -
Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end-milling of Inconel 718 using coated WC-co inserts
by: Ishtiyaq, M. H., et al.
Published: (2007)