Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts

This paper presents the investigation for assessment of tool life of PCD inserts in end milling of titanium alloy Ti-6AI-4V under dry conditions. Small central composite design (CCD) was employed to design the experiments and to develop the models which correlate tool life and the primary cutting p...

Full description

Bibliographic Details
Main Authors:	Ginta, Turnad Lenggo, Amin, A. K. M. Nurul, Lajis, Mohd Amri, Karim, A.N. Mustafizul, Sutjipto, Agus Geter Edy
Format:	Article
Language:	English
Published:	ILRAM Publisher 2008
Subjects:	T58.7 Production capacity. Manufacturing capacity
Online Access:	http://irep.iium.edu.my/26828/ http://irep.iium.edu.my/26828/1/TL_Mill_PCD_%239.pdf

id	iium-26828
recordtype	eprints
spelling	iium-268282015-09-17T02:42:33Z http://irep.iium.edu.my/26828/ Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts Ginta, Turnad Lenggo Amin, A. K. M. Nurul Lajis, Mohd Amri Karim, A.N. Mustafizul Sutjipto, Agus Geter Edy T58.7 Production capacity. Manufacturing capacity This paper presents the investigation for assessment of tool life of PCD inserts in end milling of titanium alloy Ti-6AI-4V under dry conditions. Small central composite design (CCD) was employed to design the experiments and to develop the models which correlate tool life and the primary cutting parameters such as cutting speed, axial depth of cut and feed values. The range which is used in this study for cutting speed, axial depth of cut, and feed, are 80.5 - 200 m/min, 05 - 2.0 mm, and 0.05 - 0.15 mm/tooth, respectively. Design expert package software was employed to establish the tool life models and the adequacy of the models were verified using analysis of variance at 95% of confidence interval. From the models, it was affirmed that cutting speed has the most significant effect on tool life, followed by feed and axial depth of cut ILRAM Publisher 2008 Article PeerReviewed application/pdf en http://irep.iium.edu.my/26828/1/TL_Mill_PCD_%239.pdf Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	T58.7 Production capacity. Manufacturing capacity
spellingShingle	T58.7 Production capacity. Manufacturing capacity Ginta, Turnad Lenggo Amin, A. K. M. Nurul Lajis, Mohd Amri Karim, A.N. Mustafizul Sutjipto, Agus Geter Edy Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts
description	This paper presents the investigation for assessment of tool life of PCD inserts in end milling of titanium alloy Ti-6AI-4V under dry conditions. Small central composite design (CCD) was employed to design the experiments and to develop the models which correlate tool life and the primary cutting parameters such as cutting speed, axial depth of cut and feed values. The range which is used in this study for cutting speed, axial depth of cut, and feed, are 80.5 - 200 m/min, 05 - 2.0 mm, and 0.05 - 0.15 mm/tooth, respectively. Design expert package software was employed to establish the tool life models and the adequacy of the models were verified using analysis of variance at 95% of confidence interval. From the models, it was affirmed that cutting speed has the most significant effect on tool life, followed by feed and axial depth of cut
format	Article
author	Ginta, Turnad Lenggo Amin, A. K. M. Nurul Lajis, Mohd Amri Karim, A.N. Mustafizul Sutjipto, Agus Geter Edy
author_facet	Ginta, Turnad Lenggo Amin, A. K. M. Nurul Lajis, Mohd Amri Karim, A.N. Mustafizul Sutjipto, Agus Geter Edy
author_sort	Ginta, Turnad Lenggo
title	Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts
title_short	Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts
title_full	Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts
title_fullStr	Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts
title_full_unstemmed	Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts
title_sort	tool life assessment in end milling titanium alloy (ti-6ai-4v) using pcd inserts
publisher	ILRAM Publisher
publishDate	2008
url	http://irep.iium.edu.my/26828/ http://irep.iium.edu.my/26828/1/TL_Mill_PCD_%239.pdf
first_indexed	2023-09-18T20:39:53Z
last_indexed	2023-09-18T20:39:53Z
_version_	1777409294527889408

Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts

Similar Items