Fabrication of surgical cranioplasty biomodel using fused deposition modeling

The purpose of this research is to fabricate biomodel using Rapid Prototyping (RP) technology for neuron surgeon based on case study from Kuantan Hospital. A biomodel later will be analyzed to makes the result more trustful.It is possible to produce three-dimensional model from two-dimensional...

Full description

Bibliographic Details
Main Authors:	Wan Yusoff, Wan Ahmad Yusmawiza, Mohamad Ali, Hasanudin Hafis, Md. Shukri, Md. Amir Hamzah
Format:	Conference or Workshop Item
Language:	English
Published:	2012
Subjects:	T55.4 Industrial engineering.Management engineering. TA165 Engineering instruments, meters, etc. Industrial instrumentation
Online Access:	http://irep.iium.edu.my/25086/ http://irep.iium.edu.my/25086/ http://irep.iium.edu.my/25086/1/fabrication_of_surgical.pdf

id	iium-25086
recordtype	eprints
spelling	iium-250862012-07-31T07:02:21Z http://irep.iium.edu.my/25086/ Fabrication of surgical cranioplasty biomodel using fused deposition modeling Wan Yusoff, Wan Ahmad Yusmawiza Mohamad Ali, Hasanudin Hafis Md. Shukri, Md. Amir Hamzah T55.4 Industrial engineering.Management engineering. TA165 Engineering instruments, meters, etc. Industrial instrumentation The purpose of this research is to fabricate biomodel using Rapid Prototyping (RP) technology for neuron surgeon based on case study from Kuantan Hospital. A biomodel later will be analyzed to makes the result more trustful.It is possible to produce three-dimensional model from two-dimensional images from Computerized Tomography (CT) scan where the machine provides images data are used to capture. Rapid Prototyping is a technology from mechanical engineering that is used to fabricate physical prototypes called biomedical model that can be used for surgical planning. The models produced by using RP bring the significant in educational and pre-medical surgical environments. It can simplify the complex surgical procedures and the visualization of anatomical structures in educational environment. A biomedical model analysis after the fabrication process is introduced to makes the result more trustful. Thus, it was demonstrate that biomedical model can help surgical plan and at the same time they can contribute to reduce costs, surgical times and infection risks in health care system. 2012 Conference or Workshop Item PeerReviewed application/pdf en http://irep.iium.edu.my/25086/1/fabrication_of_surgical.pdf Wan Yusoff, Wan Ahmad Yusmawiza and Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah (2012) Fabrication of surgical cranioplasty biomodel using fused deposition modeling. In: 2012 International Conference on Innovation Management and Technology Research (ICIMTR), 21 - 22 May 2012, Malacca, Malaysia. http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6236456&tag=1
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	T55.4 Industrial engineering.Management engineering. TA165 Engineering instruments, meters, etc. Industrial instrumentation
spellingShingle	T55.4 Industrial engineering.Management engineering. TA165 Engineering instruments, meters, etc. Industrial instrumentation Wan Yusoff, Wan Ahmad Yusmawiza Mohamad Ali, Hasanudin Hafis Md. Shukri, Md. Amir Hamzah Fabrication of surgical cranioplasty biomodel using fused deposition modeling
description	The purpose of this research is to fabricate biomodel using Rapid Prototyping (RP) technology for neuron surgeon based on case study from Kuantan Hospital. A biomodel later will be analyzed to makes the result more trustful.It is possible to produce three-dimensional model from two-dimensional images from Computerized Tomography (CT) scan where the machine provides images data are used to capture. Rapid Prototyping is a technology from mechanical engineering that is used to fabricate physical prototypes called biomedical model that can be used for surgical planning. The models produced by using RP bring the significant in educational and pre-medical surgical environments. It can simplify the complex surgical procedures and the visualization of anatomical structures in educational environment. A biomedical model analysis after the fabrication process is introduced to makes the result more trustful. Thus, it was demonstrate that biomedical model can help surgical plan and at the same time they can contribute to reduce costs, surgical times and infection risks in health care system.
format	Conference or Workshop Item
author	Wan Yusoff, Wan Ahmad Yusmawiza Mohamad Ali, Hasanudin Hafis Md. Shukri, Md. Amir Hamzah
author_facet	Wan Yusoff, Wan Ahmad Yusmawiza Mohamad Ali, Hasanudin Hafis Md. Shukri, Md. Amir Hamzah
author_sort	Wan Yusoff, Wan Ahmad Yusmawiza
title	Fabrication of surgical cranioplasty biomodel using fused deposition modeling
title_short	Fabrication of surgical cranioplasty biomodel using fused deposition modeling
title_full	Fabrication of surgical cranioplasty biomodel using fused deposition modeling
title_fullStr	Fabrication of surgical cranioplasty biomodel using fused deposition modeling
title_full_unstemmed	Fabrication of surgical cranioplasty biomodel using fused deposition modeling
title_sort	fabrication of surgical cranioplasty biomodel using fused deposition modeling
publishDate	2012
url	http://irep.iium.edu.my/25086/ http://irep.iium.edu.my/25086/ http://irep.iium.edu.my/25086/1/fabrication_of_surgical.pdf
first_indexed	2023-09-18T20:37:28Z
last_indexed	2023-09-18T20:37:28Z
_version_	1777409142193913856

Fabrication of surgical cranioplasty biomodel using fused deposition modeling

Similar Items