The oxygen potential on the scale surface of alloys at high temperature oxidation
The driving force of the oxide scale growth on alloy is the difference in the oxygen potential between at the alloy/scale and the scale/atmosphere interfaces. When the mass transport in the oxide scale controls the growth of the oxide scale, we usually regards the oxygen potential at the scale/atmos...
Main Authors: | Kawamura, Kenichi, Ani, Mohd Hanafi, Ueda, Mitsutoshi, Maruyama, Toshio |
---|---|
Format: | Article |
Language: | English |
Published: |
The Japan Society of Calorimetry and Thermal Analysis
2010
|
Subjects: | |
Online Access: | http://irep.iium.edu.my/23671/ http://irep.iium.edu.my/23671/ http://irep.iium.edu.my/23671/1/the_oxygen_potential_on_the_scale_surface_of_alloys_at_high_temperature_oxidation.pdf |
Similar Items
-
Evaluation of oxygen surface potential at early stage of oxidation in dry and water vapor condition at 1073 K
by: Ani, Mohd Hanafi, et al.
Published: (2010) -
The effect of water vapor on high temperature oxidation
of Fe-Cr alloys at 1073K
by: Ani, Mohd Hanafi, et al.
Published: (2009) -
Increase of oxygen permeability on metal/oxide interface during high temperature oxidation of Fe-Cr alloys in water vapor at 1073 K
by: Ani, Mohd Hanafi, et al.
Published: (2010) -
Oxygen permeability through internal oxidation zone in Fe–Cr
alloys under dry and humid conditions at 973 and 1 073 K
by: Setiawan, Asep Ridwan, et al.
Published: (2010) -
In-situ method to monitor surface reaction/oxidation at high temperature
by: Ani, Mohd Hanafi, et al.
Published: (2010)