Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC

Machine tool chatter is an intensive type of vibration of the work-tool-fixture (WTF) system during metal cutting. It is caused by interaction of the instability of the chip formation process and natural frequencies of the individual components of the WTF system [1, 2, 3]. It was established earl...

Full description

Bibliographic Details
Main Authors:	Amin, A. K. M. Nurul, Ahmad Dalhan, Salha, Sahidin @ Saleudin, Salhana
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://irep.iium.edu.my/23588/ http://irep.iium.edu.my/23588/ http://irep.iium.edu.my/23588/4/chp9.pdf

id	iium-23588
recordtype	eprints
spelling	iium-235882012-09-05T06:37:41Z http://irep.iium.edu.my/23588/ Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC Amin, A. K. M. Nurul Ahmad Dalhan, Salha Sahidin @ Saleudin, Salhana TJ Mechanical engineering and machinery Machine tool chatter is an intensive type of vibration of the work-tool-fixture (WTF) system during metal cutting. It is caused by interaction of the instability of the chip formation process and natural frequencies of the individual components of the WTF system [1, 2, 3]. It was established earlier [1, 2] and confirmed by recent investigations [4] that the chip formation process is unstable for most materials due to the formation of a fourth type of chip; namely the serrated, segmented or cyclic chip at cutting speed exceed certain critical value. When the frequencies of the instability of these serrated chip formation grow close to the natural frequencies of the individual components, resonance occurs [1, 2]. During resonance the frequency of the vibration remains practically constant and the amplitude increases to a maximum value and the gradually decreases and the component gets out of resonance [3]. This type of vibration during metal cutting is termed as chatter vibrations. The occurrence of chatter, if uncontrolled, can easily result in a poor surface finish, damaged cutting tool, and an irritating and unacceptable noise. In recent years, chatter research has been concentrated into the automatic suppression of machine tool chatter using various control strategies. One of the easy, effective, and popular chatter control strategies is the change of spindle speed [5]. This is because through a proper selection of spindle speed, a favourable condition may be generated to remove machine tool chatter. The main feature of the spindle speed control strategies is that stable spindle speeds can easily be searched without altering any machine tool structure. In the absence of stability data it is very difficult to program for the depth of cut, feed and cutting speed of the tool in order to maintain a satisfactory level of dynamic stability of the machine tool during operation. So it is important to know the ranges of cutting speed over which chatter vibration of the tool and the workpiece exists. These data could be useful in developing stability software, which could facilitate the selection spindle speeds to facilitate stable cutting operation and also for online monitoring and suppression of self excited Vibrations [6]. The present work therefore aims at investigating the influence of the tool holders (their rigidity and natural frequencies), job materials and cutting parameters on chatter and surface roughness during metal cutting on the Vertical Machining Centre (VMC) IIUM Press 2011 Book Chapter PeerReviewed application/pdf en http://irep.iium.edu.my/23588/4/chp9.pdf Amin, A. K. M. Nurul and Ahmad Dalhan, Salha and Sahidin @ Saleudin, Salhana (2011) Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 65-73. ISBN 9789674181758 http://rms.research.iium.edu.my/bookstore/default.aspx
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Amin, A. K. M. Nurul Ahmad Dalhan, Salha Sahidin @ Saleudin, Salhana Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC
description	Machine tool chatter is an intensive type of vibration of the work-tool-fixture (WTF) system during metal cutting. It is caused by interaction of the instability of the chip formation process and natural frequencies of the individual components of the WTF system [1, 2, 3]. It was established earlier [1, 2] and confirmed by recent investigations [4] that the chip formation process is unstable for most materials due to the formation of a fourth type of chip; namely the serrated, segmented or cyclic chip at cutting speed exceed certain critical value. When the frequencies of the instability of these serrated chip formation grow close to the natural frequencies of the individual components, resonance occurs [1, 2]. During resonance the frequency of the vibration remains practically constant and the amplitude increases to a maximum value and the gradually decreases and the component gets out of resonance [3]. This type of vibration during metal cutting is termed as chatter vibrations. The occurrence of chatter, if uncontrolled, can easily result in a poor surface finish, damaged cutting tool, and an irritating and unacceptable noise. In recent years, chatter research has been concentrated into the automatic suppression of machine tool chatter using various control strategies. One of the easy, effective, and popular chatter control strategies is the change of spindle speed [5]. This is because through a proper selection of spindle speed, a favourable condition may be generated to remove machine tool chatter. The main feature of the spindle speed control strategies is that stable spindle speeds can easily be searched without altering any machine tool structure. In the absence of stability data it is very difficult to program for the depth of cut, feed and cutting speed of the tool in order to maintain a satisfactory level of dynamic stability of the machine tool during operation. So it is important to know the ranges of cutting speed over which chatter vibration of the tool and the workpiece exists. These data could be useful in developing stability software, which could facilitate the selection spindle speeds to facilitate stable cutting operation and also for online monitoring and suppression of self excited Vibrations [6]. The present work therefore aims at investigating the influence of the tool holders (their rigidity and natural frequencies), job materials and cutting parameters on chatter and surface roughness during metal cutting on the Vertical Machining Centre (VMC)
format	Book Chapter
author	Amin, A. K. M. Nurul Ahmad Dalhan, Salha Sahidin @ Saleudin, Salhana
author_facet	Amin, A. K. M. Nurul Ahmad Dalhan, Salha Sahidin @ Saleudin, Salhana
author_sort	Amin, A. K. M. Nurul
title	Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC
title_short	Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC
title_full	Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC
title_fullStr	Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC
title_full_unstemmed	Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC
title_sort	influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on vmc
publisher	IIUM Press
publishDate	2011
url	http://irep.iium.edu.my/23588/ http://irep.iium.edu.my/23588/ http://irep.iium.edu.my/23588/4/chp9.pdf
first_indexed	2023-09-18T20:35:38Z
last_indexed	2023-09-18T20:35:38Z
_version_	1777409026380791808

Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC

Similar Items