Cost Model for end-milling of AISI D2 tool steel

In this research paper, user-friendly and accurate mathematical model for estimating the cost of end-milling of AISI D2 tool steel using Polycrystalline Cubic Boron Nitride (PCBN) cutting tool inserts is developed. Initially, the different components of machining cost were identified, followed by es...

Full description

Bibliographic Details
Main Authors:	Mohamed, Elhadie, A.N., Mustafizul Karim, Amin, A. K. M. Nurul
Format:	Conference or Workshop Item
Language:	English
Published:	2011
Subjects:	TJ241 Machine construction (General)
Online Access:	http://irep.iium.edu.my/22561/ http://irep.iium.edu.my/22561/ http://irep.iium.edu.my/22561/1/Cost_Model_for_End-Milling_of_AISI_D2_Tool_Steel.pdf

id	iium-22561
recordtype	eprints
spelling	iium-225612012-11-21T08:00:52Z http://irep.iium.edu.my/22561/ Cost Model for end-milling of AISI D2 tool steel Mohamed, Elhadie A.N., Mustafizul Karim Amin, A. K. M. Nurul TJ241 Machine construction (General) In this research paper, user-friendly and accurate mathematical model for estimating the cost of end-milling of AISI D2 tool steel using Polycrystalline Cubic Boron Nitride (PCBN) cutting tool inserts is developed. Initially, the different components of machining cost were identified, followed by establishment of equations to determine their values. Then, the required experimental and non-experimental data were collected and the bottom-up approach was adopted for evaluating the cost of machining corresponding to each of fifteen experimental runs. The Response Surface Methodology (RSM) was used to develop the model in which the cost of machining is given as a function of the machining parameters; cutting speed, feed per tooth, and depth of cut, and expressed in Ringgit Malaysia per cubic cm (RM per cm)3. Analysis of Variance (ANOVA) was utilized to check the adequacy of the developed model. The developed model was found to be statistically adequate. 2011 Conference or Workshop Item PeerReviewed application/pdf en http://irep.iium.edu.my/22561/1/Cost_Model_for_End-Milling_of_AISI_D2_Tool_Steel.pdf Mohamed, Elhadie and A.N., Mustafizul Karim and Amin, A. K. M. Nurul (2011) Cost Model for end-milling of AISI D2 tool steel. In: 2011 National Postgraduate Conference (NPC), 19-20 Sept. 2011, Kuala Lumpur. http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6136403&tag=1
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TJ241 Machine construction (General)
spellingShingle	TJ241 Machine construction (General) Mohamed, Elhadie A.N., Mustafizul Karim Amin, A. K. M. Nurul Cost Model for end-milling of AISI D2 tool steel
description	In this research paper, user-friendly and accurate mathematical model for estimating the cost of end-milling of AISI D2 tool steel using Polycrystalline Cubic Boron Nitride (PCBN) cutting tool inserts is developed. Initially, the different components of machining cost were identified, followed by establishment of equations to determine their values. Then, the required experimental and non-experimental data were collected and the bottom-up approach was adopted for evaluating the cost of machining corresponding to each of fifteen experimental runs. The Response Surface Methodology (RSM) was used to develop the model in which the cost of machining is given as a function of the machining parameters; cutting speed, feed per tooth, and depth of cut, and expressed in Ringgit Malaysia per cubic cm (RM per cm)3. Analysis of Variance (ANOVA) was utilized to check the adequacy of the developed model. The developed model was found to be statistically adequate.
format	Conference or Workshop Item
author	Mohamed, Elhadie A.N., Mustafizul Karim Amin, A. K. M. Nurul
author_facet	Mohamed, Elhadie A.N., Mustafizul Karim Amin, A. K. M. Nurul
author_sort	Mohamed, Elhadie
title	Cost Model for end-milling of AISI D2 tool steel
title_short	Cost Model for end-milling of AISI D2 tool steel
title_full	Cost Model for end-milling of AISI D2 tool steel
title_fullStr	Cost Model for end-milling of AISI D2 tool steel
title_full_unstemmed	Cost Model for end-milling of AISI D2 tool steel
title_sort	cost model for end-milling of aisi d2 tool steel
publishDate	2011
url	http://irep.iium.edu.my/22561/ http://irep.iium.edu.my/22561/ http://irep.iium.edu.my/22561/1/Cost_Model_for_End-Milling_of_AISI_D2_Tool_Steel.pdf
first_indexed	2023-09-18T20:34:19Z
last_indexed	2023-09-18T20:34:19Z
_version_	1777408944035069952

Cost Model for end-milling of AISI D2 tool steel

Similar Items