Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V

Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V

Dynamic change in cutting force is one of the major causes of chatter formation in metal cutting which affect machining accuracy. Thus, accurate modeling of cutting force is necessary for the prediction of machining performance and determination of the mechanisms and machining parameters that affect...

Full description

Bibliographic Details
Main Authors: Patwari, Muhammed Anayet Ullah, A.K.M., Nurul Amin, Faris, Waleed Fekry
Format: Article
Language:English
Published: Trans Tech Publications, Switzerland 2011
Subjects:
T Technology (General)
Online Access:http://irep.iium.edu.my/22023/
http://irep.iium.edu.my/22023/
http://irep.iium.edu.my/22023/
http://irep.iium.edu.my/22023/1/2011_-AMR.264-265.1160.pdf
id iium-22023
recordtype eprints
spelling iium-220232012-03-12T03:46:55Z http://irep.iium.edu.my/22023/ Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V Patwari, Muhammed Anayet Ullah A.K.M., Nurul Amin Faris, Waleed Fekry T Technology (General) Dynamic change in cutting force is one of the major causes of chatter formation in metal cutting which affect machining accuracy. Thus, accurate modeling of cutting force is necessary for the prediction of machining performance and determination of the mechanisms and machining parameters that affect the stability of machining operations. The present paper discusses the development of a mathematical model for predicting the tangential cutting force produced in endmilling operation of Ti6Al4V. The mathematical model for cutting force prediction has been developed in terms of the input cutting parameters cutting speed, feed rate, and axial depth of cut using response surface methodology (RSM). Effects of all the individual cutting parameters on cutting force as well as their interactions are investigated in this study. Central composite design was employed in developing the cutting force model in relation to the primary cutting parameters. The experimental results indicate that the proposed mathematical models suggested could adequately describe the performance indicators within the limits of the factors that are being investigated. Trans Tech Publications, Switzerland 2011-06-30 Article PeerReviewed application/pdf en http://irep.iium.edu.my/22023/1/2011_-AMR.264-265.1160.pdf Patwari, Muhammed Anayet Ullah and A.K.M., Nurul Amin and Faris, Waleed Fekry (2011) Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V. Advanced Materials Research, 264/65. pp. 1160-1165. ISSN 1022-6680 http://www.scientific.net/AMR.264-265.1160 10.4028/www.scientific.net/AMR.264-265.1160
repository_type Digital Repository
institution_category Local University
institution International Islamic University Malaysia
building IIUM Repository
collection Online Access
language English
topic T Technology (General)
spellingShingle T Technology (General)
Patwari, Muhammed Anayet Ullah
A.K.M., Nurul Amin
Faris, Waleed Fekry
Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V
description Dynamic change in cutting force is one of the major causes of chatter formation in metal cutting which affect machining accuracy. Thus, accurate modeling of cutting force is necessary for the prediction of machining performance and determination of the mechanisms and machining parameters that affect the stability of machining operations. The present paper discusses the development of a mathematical model for predicting the tangential cutting force produced in endmilling operation of Ti6Al4V. The mathematical model for cutting force prediction has been developed in terms of the input cutting parameters cutting speed, feed rate, and axial depth of cut using response surface methodology (RSM). Effects of all the individual cutting parameters on cutting force as well as their interactions are investigated in this study. Central composite design was employed in developing the cutting force model in relation to the primary cutting parameters. The experimental results indicate that the proposed mathematical models suggested could adequately describe the performance indicators within the limits of the factors that are being investigated.
format Article
author Patwari, Muhammed Anayet Ullah
A.K.M., Nurul Amin
Faris, Waleed Fekry
author_facet Patwari, Muhammed Anayet Ullah
A.K.M., Nurul Amin
Faris, Waleed Fekry
author_sort Patwari, Muhammed Anayet Ullah
title Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V
title_short Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V
title_full Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V
title_fullStr Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V
title_full_unstemmed Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V
title_sort statistical approach for the development of tangential cutting force model in end milling of ti6al4v
publisher Trans Tech Publications, Switzerland
publishDate 2011
url http://irep.iium.edu.my/22023/
http://irep.iium.edu.my/22023/
http://irep.iium.edu.my/22023/
http://irep.iium.edu.my/22023/1/2011_-AMR.264-265.1160.pdf
first_indexed 2023-09-18T20:33:40Z
last_indexed 2023-09-18T20:33:40Z
_version_ 1777408903264337920

Similar Items