Porous alumina–hydroxyapatite composites through protein foaming–consolidation method

This report presents physical characterization and cell culture test of porous alumina–hydroxyapatite (HA) composites fabricated through protein foaming–consolidation technique. Alumina and HA powders were mixed with yolk and starch at an adjusted ratio to make slurry. The resulting slip was poured...

Full description

Bibliographic Details
Main Authors:	Sopyan, Iis, Fadli, Ahmad, Mel, Maizirwan
Format:	Article
Language:	English
Published:	Elsevier 2012
Subjects:	TS Manufactures
Online Access:	http://irep.iium.edu.my/21456/ http://irep.iium.edu.my/21456/ http://irep.iium.edu.my/21456/ http://irep.iium.edu.my/21456/1/JMBBM2012_5.pdf

id	iium-21456
recordtype	eprints
spelling	iium-214562012-04-03T07:36:05Z http://irep.iium.edu.my/21456/ Porous alumina–hydroxyapatite composites through protein foaming–consolidation method Sopyan, Iis Fadli, Ahmad Mel, Maizirwan TS Manufactures This report presents physical characterization and cell culture test of porous alumina–hydroxyapatite (HA) composites fabricated through protein foaming–consolidation technique. Alumina and HA powders were mixed with yolk and starch at an adjusted ratio to make slurry. The resulting slip was poured into cylindrical shaped molds and followed by foaming and consolidation via 180 °C drying for 1 h. The obtained green bodies were burned at 600 °C for 1 h, followed by sintering at temperatures of 1200–1550 °C for 2 h. Porous alumina–HA bodies with 26–77 vol.% shrinkage, 46%–52% porosity and 0.1–6.4 MPa compressive strength were obtained. The compressive strength of bodies increased with the increasing sintering temperatures. The addition of commercial HA in the body was found to increase the compressive strength, whereas the case is reverse for sol–gel derived HA. Biocompatibility study of porous alumina–HA was performed in a stirred tank bioreactor using culture of Vero cells. A good compatibility of the cells to the porous microcarriers was observed as the cells attached and grew at the surface of microcarriers at 8–120 cultured hours. The cell growth on porous alumina microcarrier was 0.015 h−1 and increased to 0.019 h−1 for 0.3 w/w HA-to-alumina mass ratio and decreased again to 0.017 h−1 for 1.0 w/w ratio. Elsevier 2012-04 Article PeerReviewed application/pdf en http://irep.iium.edu.my/21456/1/JMBBM2012_5.pdf Sopyan, Iis and Fadli, Ahmad and Mel, Maizirwan (2012) Porous alumina–hydroxyapatite composites through protein foaming–consolidation method. Journal of the Mechanical Behavior of Biomedical Materials, 8. pp. 86-98. ISSN 1751-6161 http://www.sciencedirect.com/science/article/pii/S1751616111002967 DOI: 10.1016/j.jmbbm.2011.10.012
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TS Manufactures
spellingShingle	TS Manufactures Sopyan, Iis Fadli, Ahmad Mel, Maizirwan Porous alumina–hydroxyapatite composites through protein foaming–consolidation method
description	This report presents physical characterization and cell culture test of porous alumina–hydroxyapatite (HA) composites fabricated through protein foaming–consolidation technique. Alumina and HA powders were mixed with yolk and starch at an adjusted ratio to make slurry. The resulting slip was poured into cylindrical shaped molds and followed by foaming and consolidation via 180 °C drying for 1 h. The obtained green bodies were burned at 600 °C for 1 h, followed by sintering at temperatures of 1200–1550 °C for 2 h. Porous alumina–HA bodies with 26–77 vol.% shrinkage, 46%–52% porosity and 0.1–6.4 MPa compressive strength were obtained. The compressive strength of bodies increased with the increasing sintering temperatures. The addition of commercial HA in the body was found to increase the compressive strength, whereas the case is reverse for sol–gel derived HA. Biocompatibility study of porous alumina–HA was performed in a stirred tank bioreactor using culture of Vero cells. A good compatibility of the cells to the porous microcarriers was observed as the cells attached and grew at the surface of microcarriers at 8–120 cultured hours. The cell growth on porous alumina microcarrier was 0.015 h−1 and increased to 0.019 h−1 for 0.3 w/w HA-to-alumina mass ratio and decreased again to 0.017 h−1 for 1.0 w/w ratio.
format	Article
author	Sopyan, Iis Fadli, Ahmad Mel, Maizirwan
author_facet	Sopyan, Iis Fadli, Ahmad Mel, Maizirwan
author_sort	Sopyan, Iis
title	Porous alumina–hydroxyapatite composites through protein foaming–consolidation method
title_short	Porous alumina–hydroxyapatite composites through protein foaming–consolidation method
title_full	Porous alumina–hydroxyapatite composites through protein foaming–consolidation method
title_fullStr	Porous alumina–hydroxyapatite composites through protein foaming–consolidation method
title_full_unstemmed	Porous alumina–hydroxyapatite composites through protein foaming–consolidation method
title_sort	porous alumina–hydroxyapatite composites through protein foaming–consolidation method
publisher	Elsevier
publishDate	2012
url	http://irep.iium.edu.my/21456/ http://irep.iium.edu.my/21456/ http://irep.iium.edu.my/21456/ http://irep.iium.edu.my/21456/1/JMBBM2012_5.pdf
first_indexed	2023-09-18T20:32:36Z
last_indexed	2023-09-18T20:32:36Z
_version_	1777408835491725312

Porous alumina–hydroxyapatite composites through protein foaming–consolidation method

Similar Items