Sintering of hydroxyapatite ceramic produced by wet chemical method
In the present work, densification of synthesised hydroxyapatite (HA) bioceramic prepared via chemical precipitation method was investigated. HA samples was prepared by compaction at 200 MPa and sintered at temperatures ranging from 800°C to 1400°C. The results revealed that the HA phase was stable...
Main Authors: | Singh, Ramesh, Ranna, Tolouei, Tan, Chou Yong, K. L., Aw, W., H. Yeo, Iis, Sopyan, Teng, Wan Dung |
---|---|
Format: | Article |
Language: | English |
Published: |
Trans Tech Publications, Switzerland
2011
|
Subjects: | |
Online Access: | http://irep.iium.edu.my/21423/ http://irep.iium.edu.my/21423/ http://irep.iium.edu.my/21423/ http://irep.iium.edu.my/21423/1/AMR.264-265.1856_9.pdf |
Similar Items
-
Sintering behavior of hydroxyapatite ceramics prepared by different routes
by: Chou Yong, Tan, et al.
Published: (2009) -
Effects of bismuth oxide on the sinterability of hydroxyapatite
by: Ramesh, Singh, et al.
Published: (2011) -
Effects of powder synthesis method on the sinterability of hydroxyapatite
by: K. L., Aw, et al.
Published: (2011) -
Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics
by: Tolouei, Ranna, et al.
Published: (2011) -
Sintering behavior of hydroxyapatite prepared from different routes
by: Ramesh, Singh, et al.
Published: (2012)