The effect of stucco system in ceramic shell investment casting

The effect of stucco system in ceramic shell investment casting

Bibliographic Details
Main Authors:	Mohamad Badari, Siti Norbahiyah, Adesta, Erry Yulian Triblas
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TS Manufactures
Online Access:	http://irep.iium.edu.my/21351/ http://irep.iium.edu.my/21351/ http://irep.iium.edu.my/21351/1/17.pdf

Similar Items

Effect of welding process on formability of tailor welded blanks
by: Mushtaq, Umer, et al.
Published: (2011)

Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2011)

Effect of casting temperature on dimensional accuracy in gravity casting
by: Mohd Shariman, Razali
Published: (2009)

Micro electro discharge machining of nonconductive ceramic
by: Ali, Mohammad Yeakub, et al.
Published: (2018)

Effects of austempering treatment on mechanical properties of ductile iron
by: Ahmed Ghazal, Belal, et al.
Published: (2011)

The effect of deep cryogenic treatment on the properties of AISI D2 tool steel
by: Ahmed Ghazal, Belal, et al.
Published: (2011)

Casting investigation of heat treated biocompatible materials for total hip bone replacement
by: Mohamad Badari, Siti Norbahiyah, et al.
Published: (2011)

Development of surface roughness prediction model for high speed end milling of hardened tool steel
by: Mohd Ali , Afifah, et al.
Published: (2011)

The evaluation of lean manufacturing implementation and their impact to manufacturing performance
by: Adesta, Erry Yulian Triblas, et al.
Published: (2018)

The project management challenges in technology innovation
by: Mahmood, Mahmood Hameed, et al.
Published: (2011)

Effect of melting temperature on dimensional accuracy in sand casting product
by: Ahmad Faizal, Mohamad
Published: (2009)

Low temperature solder alloys for ultrasonic soldering of glass
by: Mustafa, Yusri, et al.
Published: (2015)

Effect of Workpiece Volume on Shell Wall Thickness Reduction in Rapid Casting of Aluminum using Three-Dimensional Printing
by: Singh, Rupinder, et al.
Published: (2012)

Hardware improvement of FDM 3D printer: issue of bed leveling failures
by: Arief, Rudi Kurniawan, et al.
Published: (2019)

Microwave sintering of ceramic materials
by: Mohamed Ariff, Tasnim Firdaus
Published: (2011)

A study on mold material and coating effect in sand casting process
by: Muhammad Fakhri, Zainuddin
Published: (2009)

Effects of manganese doping on the dielectric properties of titanium dioxide ceramics
by: Iis, Sopyan, et al.
Published: (2011)

Indentation mechanism in rotary hammer forging process: analytical and numerical approach
by: Saud FEMD Alazemi, Saud, et al.
Published: (2018)

Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process
by: Mohd Ali, Afifah, et al.
Published: (2011)

Investigation of the effect of "Orange Peel" surface texture on the laser sintered part
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Design and fabrication of hole cover by casting process
by: Muhammad Kamili, Zahidi
Published: (2011)

Mould design and mechanical analysis of the casted material
by: Mohd Azuan, Abu Shah
Published: (2010)

Design and fabrication of drain cover by casting process
by: Muhamad Amin, Ab Rasak
Published: (2012)

Mold design & surface analysis of casted material
by: Annafi, Mohd Khobori
Published: (2010)

New approach in cost structuring of high speed hard turning
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2011)

Tool life in high speed turning with negative rake angle
by: Adesta, Erry Yulian Triblas, et al.
Published: (2011)

Flank Wear Modeling in High Speed Hard Turning by using artificial Neural Network and Regression Analysis
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2011)

Machining Time Simulation in High Speed Hard Turning
by: Adesta, Erry Yulian Triblas, et al.
Published: (2011)

Critical chain in project management
by: Adesta, Erry Yulian Triblas, et al.
Published: (2011)

Investigation on structure and properties of brass casting
by: Haque, Md. Mohafizul, et al.
Published: (2008)

Cutting force impact to tool life of CT5015 in high speed machining by applying negative rake angles
by: Adesta, Erry Yulian Triblas, et al.
Published: (2012)

The Development of Cost Structure for High Speed Hard Turning
by: Adesta, Erry Yulian Triblas, et al.
Published: (2008)

Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel
by: Adesta, Erry Yulian Triblas, et al.
Published: (2018)

Influence of machining parameters on surface roughness during EDM of mild steel
by: Khan, Ahsan Ali, et al.
Published: (2011)

Formation of micro-cracks and recast layer during EDM of mild steel using copper electrodes
by: Khan, Ahsan Ali, et al.
Published: (2011)

Influence of process parameters on surface integrity during EDM of mild steel
by: Khan, Ahsan Ali, et al.
Published: (2010)

Investigation of brass microstructure and mechanical properties using metal casting
by: Nur Hamizah, Minhat
Published: (2010)

The study of the implementation of OHSAS : 18001 at Kulliyyah of Engineering (KOE)
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Sintering of hydroxyapatite ceramic produced by wet chemical method
by: Singh, Ramesh, et al.
Published: (2011)

The development of ceramic insert of alumina toughened by zirconia and copper
by: Nurfatini, Zolkafli
Published: (2017)

Cannot write session to /tmp/vufind_sessions/sess_biu4a8f523g4ndajbddoeruhqb