Cost comparison analysis between strip to coil for support brake pedal at Suria Component (M) Sdn. Bhd

Cost comparison analysis between strip to coil for support brake pedal at Suria Component (M) Sdn. Bhd

Bibliographic Details
Main Authors:	Che Daud, Mohd Radzi, Alies, Shamin Asyrani, Saleh, Norhayati
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TA401 Materials of engineering and construction
Online Access:	http://irep.iium.edu.my/21343/ http://irep.iium.edu.my/21343/ http://irep.iium.edu.my/21343/1/11.pdf

Similar Items

Technology of moulding for composite auto brake rotor
by: Maleque, Md. Abdul
Published: (2011)

Development of optical switch for indoor LAN using SMA coil and magnetic latch
by: Bhuiyan, Moinul, et al.
Published: (2003)

A critical review of metal matrix composite brake rotor
by: Maleque, Md. Abdul
Published: (2011)

Fabrication of metal matrix composite automotive brake rotor: part 1
by: Maleque, Md. Abdul
Published: (2011)

Fabrication of metal matrix composite automotive brake rotor: part 2
by: Maleque, Md. Abdul
Published: (2011)

High performance aluminium composite brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2013)

Composite brake rotor: energy savings and wear performance
by: Maleque, Md. Abdul
Published: (2015)

Energy and cost analysis of weight reduction using composite brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2012)

Reverse engineering for rapid prototyping of automotive components
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Performance assessment of aluminium composite material for automotive brake rotor
by: Maleque, Md. Abdul
Published: (2014)

Development And Characterization Of Coir Fibre Reinforced Composite Brake Friction Materials
by: Maleque, Md. Abdul, et al.
Published: (2013)

Prototype development of light weight aluminium matrix composite automotive brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2017)

Energy saving and performance stability of silicon carbide reinforced aluminium composite automotive brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2013)

Lighter weight and energy efficient eco-siC composite for motorbike brake disc application
by: Maleque, Md. Abdul, et al.
Published: (2018)

The impact of manufactured sand (M-Sand) as partially and fully replacement of fine aggregate in concrete
by: Nadimalla, Altamashuddinkhan, et al.
Published: (2020)

Eco-friendly automotive disc brake and cylinder liner (Eco SiC)
by: Maleque, Md. Abdul, et al.
Published: (2017)

Pattern of muscle contraction in car pedal control
by: Nor Kamaliana Khamis,, et al.
Published: (2018)

Characterization of Tribo-corrosion using jatropha curcas linnaeas biodiesel for automotive engine component materials
by: Maleque, Md. Abdul, et al.
Published: (2016)

Study the adherence of the values in the ISO 9001:2000 certified companies in Malaysia
by: Che Daud, Mohd Radzi, et al.
Published: (2011)

Hot machining of hardened steels with coated carbide inserts
by: Lajis, Mohd Amri, et al.
Published: (2009)

Sistem suria
by: Claybourne
Published: (2011)

Sistem suria
by: Goldsmith
Published: (2009)

Agreements Exchanged between UMP and Mercedes-Benz (M) Sdn. Bhd.
by: UMP, PNC
Published: (2018)

Implementation of ordering kanban for supplier at company Proreka (M) Sdn Bhd
by: Lim, Qian Bing
Published: (2012)

Strip search
by: Bradley
Published: (2013)

Wear and corrosion of composite coated AISI 4340 steel exposed to jatropha curcas biodiesel
by: Maleque, Md. Abdul, et al.
Published: (2014)

The effect of water vapor on high temperature oxidation of Fe-Cr alloys at 1073K
by: Ani, Mohd Hanafi, et al.
Published: (2009)

Oxygen permeability through internal oxidation zone in Fe–Cr alloys under dry and humid conditions at 973 and 1 073 K
by: Setiawan, Asep Ridwan, et al.
Published: (2010)

Evaluation of oxygen surface potential at early stage of oxidation in dry and water vapor condition at 1073 K
by: Ani, Mohd Hanafi, et al.
Published: (2010)

Increase of oxygen permeability on metal/oxide interface during high temperature oxidation of Fe-Cr alloys in water vapor at 1073 K
by: Ani, Mohd Hanafi, et al.
Published: (2010)

Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments
by: Akhbar, Kaderi, et al.
Published: (2011)

Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics
by: Tolouei, Ranna, et al.
Published: (2011)

Chemical resistance tests on PP-ternary nanocomposite for its application in bioreactor liner fabrication
by: Yusof, Faridah, et al.
Published: (2011)

Effect of hydroxyapatite and tricalcium phosphate addition on protein foaming-consolidation porous alumina
by: Sopyan, Iis, et al.
Published: (2011)

Design and performance analysis of VCO for standard GSM using MEMS
by: Al-Khateeb, Khalid A. Saeed, et al.
Published: (2010)

Compaction of fly ash–aluminum alloy composites and evaluation of their mechanical and acoustic properties
by: Hrairi, Meftah, et al.
Published: (2009)

Properties of compression moulding starch-nanoclay biocomposites
by: Ahmad, Zuraida, et al.
Published: (2011)

Design for manufacture: towards improved manufacturability
Published: (2011)

Design of a simple and affordable electric bicycle
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2011)

Design of bicycle helmet using FEA
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2011)

Cannot write session to /tmp/vufind_sessions/sess_hb357pubadrq5jm995s88b4evd