Recent trend on application of high temperature ferritic Fe-Cr alloys in solid oxide fuel cells

Recent trend on application of high temperature ferritic Fe-Cr alloys in solid oxide fuel cells

Bibliographic Details
Main Authors:	Ani, Mohd Hanafi, Othman, Raihan
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://irep.iium.edu.my/19406/ http://irep.iium.edu.my/19406/ http://irep.iium.edu.my/19406/1/chp18.pdf

Similar Items

Recent trend in application of high temperature ferritic Fe-Cr alloys in power plant
by: Ani, Mohd Hanafi, et al.
Published: (2011)

The effects of water vapor on high temperature oxidation of Fe-Cr-Ni alloy at 1073k
by: Ani, Mohd Hanafi, et al.
Published: (2012)

Surface oxygen potential on the oxide scale during high temperature oxidation of Fe-Cr alloys at 1073 K
by: Ani, Mohd Hanafi, et al.
Published: (2011)

The effect of water vapor on high temperature oxidation of Fe-Cr alloys at 1073K
by: Ani, Mohd Hanafi, et al.
Published: (2009)

Studies on initial stage of high temperature oxidation of Fe - 9 to 12% Cr alloys in water vapour environment
by: Kaderi, Akbar, et al.
Published: (2012)

Increase of oxygen permeability on metal/oxide interface during high temperature oxidation of Fe-Cr alloys in water vapor at 1073 K
by: Ani, Mohd Hanafi, et al.
Published: (2010)

Water vapour effects of cyclic oxidation on Fe-Cr alloys
by: N.K. Othman,, et al.
Published: (2010)

Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments
by: Akhbar, Kaderi, et al.
Published: (2011)

Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments
by: Kaderi, Akbar, et al.
Published: (2011)

High-temperature Oxidation of Fe-Cr Steels in Steam Condition - A Review
by: Kurniawan, Tedi, et al.
Published: (2016)

Effect of dissolved hydrogen on Schottky barrier height of Fe-Cr alloy heterojunction
by: Berahim, A N, et al.
Published: (2018)

Internal oxidation of Ni-Cr-Al alloys under various oxygen partial pressures at 1273 K
by: Ani, Mohd Hanafi, et al.
Published: (2012)

Oxygen permeability through internal oxidation zone in Fe–Cr alloys under dry and humid conditions at 973 and 1 073 K
by: Setiawan, Asep Ridwan, et al.
Published: (2010)

The oxygen potential on the scale surface of alloys at high temperature oxidation
by: Kawamura, Kenichi, et al.
Published: (2010)

The effect of temperature on the chromizing process for Ferritic-Martensitic steel
by: F, Farah Alia, et al.
Published: (2017)

Effects of sintering time and temperature to the characteristics of FeCrAl powder compacts formed at elevated temperature
by: Rahman, Md Mujibur, et al.
Published: (2018)

Measurement of oxygen permeability in bulk alloys by internal oxidation of dilute constituent
by: Ani, Mohd Hanafi, et al.
Published: (2011)

Measurement of oxygen permeability in bulk alloys by internal oxidation of dilute constituent
by: Ani, Mohd Hanafi, et al.
Published: (2011)

Direct-methane Solid Oxide Fuel Cell (SOFC) with Ni-SDC Anode-Supported Cell
by: Asmida, Ideris, et al.
Published: (2017)

Formation of protective Cr2O3 scale at high temperature and the effect of mass transport in the presence of water vapor
by: Ani, Mohd Hanafi, et al.
Published: (2012)

Effects of sintering schedule to the characteristics of FeCrAl powder compacts formed at elevated temperature
by: Rahman, Md Mujibur, et al.
Published: (2018)

Carbon formation inhibition in solid oxide fuel cells (SOFCs) using H2S
by: Asmida, Ideris
Published: (2014)

Effects of hydroxyapatite coating with oxide interlayer on bioactivity performances in CoCrMo alloy
by: Mas Ayu, Hassan
Published: (2015)

Microstructure, phase formation and hardness investigation of argon arc melted Al-Co-Cr-Fe-Ni and Al-Cu-Cr-Fe-Ni Highentropy Alloys (HEA) with elemental additions / Rafidah Razuan
by: Razuan, Rafidah
Published: (2017)

Cr-Ni Alloy Electrodeposition and Comparison with Conventional Pure Cr Coating Technique
by: Moniruzzaman, M., et al.
Published: (2012)

Model development and validation of samaria doped ceria (SDC) based solid oxide fuel cell operating with practical fuels
by: Mazni, Ismail
Published: (2013)

Microstructural evaluation and corrosion behaviour of Fe-Cr-Ni-Mn-Co AND AI0.5-Fe-Cr-Ni-Mn-Co highentropy alloys (HEA) with elemental additions / Siti Sarah Mohd Pauzi
by: Mohd Pauzi, Siti Sarah
Published: (2018)

Effect of Thermal Oxidation and Carbon Concentrations on Co-Cr-Mo Alloy in Enhanced Corrosion Protection
by: Mas Ayu, Hassan, et al.
Published: (2018)

Effect of thermal oxidation and carbon concentration on Co-Cr-Mo alloy in enhanced corrosion protection
by: Mas Ayu, Hassan, et al.
Published: (2018)

Anomalous temperature dependence of electrical resistivity in Mg0.6Zn0.4Fe2O4 ferrite
by: Mustafa Hj. Abdullah,, et al.
Published: (1996)

In-situ method to monitor surface reaction/oxidation at high temperature
by: Ani, Mohd Hanafi, et al.
Published: (2010)

Initial stage oxidation of cr in dry and wet environment at 1073 K and the significant differences of FT – IR spectra produced thereof
by: Kaderi, Akbar, et al.
Published: (2012)

Schottky's barrier height of T91/Cr2O3 heterojunction in dry and wet conditions: effects of watervapor onto accelerated high temperature oxidation
by: Ani, Mohd Hanafi, et al.
Published: (2018)

Privatization : Trends and Recent Developments
by: Kikeri, Sunita, et al.
Published: (2012)

Recent Trends in Bank Privatization
by: Bertay, Ata Can, et al.
Published: (2020)

Ni-samaria-doped Ceria (Ni-SDC) Anode-supported Solid Oxide Fuel Cell (SOFC) Operating with CO
by: Asmida, Ideris, et al.
Published: (2017)

Evaluation of La0.6Sr0.4Co0.2Fe0.8O3-δ as a potential cathode for proton-conducting solid oxide fuel cell
by: Ismariza Ismail,, et al.
Published: (2018)

Effect of Sintering Temperature on Physical Properties & hardness of CoCrMo alloys fabricated by metal injection moulding process
by: Ahmad Ridwan, Abdullah, et al.
Published: (2017)

Principle of solid electrolyte oxygen sensor
by: Ani, Mohd Hanafi, et al.
Published: (2011)

Recent advances in biofuel cell and emerging hybrid system
by: Ahmad, Abdul Aziz, et al.
Published: (2013)

Cannot write session to /tmp/vufind_sessions/sess_63604brp1sgi1d2qphbnvq6csm