Fabrication of metal matrix composite automotive brake rotor: part 2

Fabrication of metal matrix composite automotive brake rotor: part 2

Bibliographic Details
Main Author:	Maleque, Md. Abdul
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TA401 Materials of engineering and construction
Online Access:	http://irep.iium.edu.my/19235/ http://irep.iium.edu.my/19235/ http://irep.iium.edu.my/19235/1/Chapter_16.pdf

Similar Items

Fabrication of metal matrix composite automotive brake rotor: part 1
by: Maleque, Md. Abdul
Published: (2011)

A critical review of metal matrix composite brake rotor
by: Maleque, Md. Abdul
Published: (2011)

Technology of moulding for composite auto brake rotor
by: Maleque, Md. Abdul
Published: (2011)

Prototype development of light weight aluminium matrix composite automotive brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2017)

Performance assessment of aluminium composite material for automotive brake rotor
by: Maleque, Md. Abdul
Published: (2014)

High performance aluminium composite brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2013)

Composite brake rotor: energy savings and wear performance
by: Maleque, Md. Abdul
Published: (2015)

Energy and cost analysis of weight reduction using composite brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2012)

Energy saving and performance stability of silicon carbide reinforced aluminium composite automotive brake rotor
by: Maleque, Md. Abdul, et al.
Published: (2013)

Wear of aluminium matrix composite – effects of reinforcement combination
by: Maleque, Md. Abdul, et al.
Published: (2011)

Fabrication of biodegradable composite – an implication of plasticizer
by: Kaiser, Mohammad Rejaul, et al.
Published: (2010)

A review of wear mechanisms of ceramic-reinforced metal-matrix composite: case study of nano silica reinforced iron
by: Amir, Adibah, et al.
Published: (2011)

Fracture behavior of natural fiber reinforced biopolymer matrix composite
by: Yusof, Yusliza, et al.
Published: (2008)

Development And Characterization Of Coir Fibre Reinforced Composite Brake Friction Materials
by: Maleque, Md. Abdul, et al.
Published: (2013)

Cotton reinforced biopolymer matrix composite: effect of ultraviolet (UV) on its mechanical properties
by: Ahmad, Zuraida, et al.
Published: (2011)

Wear study of Mg-SiCp reinforcement aluminium metal matrix composite
by: Maleque, Md. Abdul, et al.
Published: (2016)

Fabrication of CuSiC composite by powder metallurgy route
by: A. R. , Fatimah Azreen, et al.
Published: (2011)

Variation of fiber architecture on loads applied in fabrication of epoxy/woven fiber glass composites
by: Md Idriss, Ahmed Nazrin, et al.
Published: (2011)

Lighter weight and energy efficient eco-siC composite for motorbike brake disc application
by: Maleque, Md. Abdul, et al.
Published: (2018)

Effect of oil palm ash on the mechanical and thermal properties of unsaturated polyester composites
by: Sahari, Japar, et al.
Published: (2016)

Reverse engineering for rapid prototyping of automotive components
by: Wan Yusoff, Wan Ahmad Yusmawiza, et al.
Published: (2011)

Cost comparison analysis between strip to coil for support brake pedal at Suria Component (M) Sdn. Bhd
by: Che Daud, Mohd Radzi, et al.
Published: (2011)

Microstructural and compositional study of metal laminated composite in Malay Keris
by: Musa, Mukhtarudin, et al.
Published: (2017)

Effects of SiO2 particles in mechanical properties of iron composite
by: Amir, Adibah, et al.
Published: (2014)

Micro connector fabricated by micro process technology
by: Bhuiyan, Md. Moinul Islam, et al.
Published: (2000)

Eco-friendly automotive disc brake and cylinder liner (Eco SiC)
by: Maleque, Md. Abdul, et al.
Published: (2017)

Digital logic and knowledge-based system for the automotive piston material selection
by: Maleque, Md. Abdul, et al.
Published: (2012)

Design and fabrication of industrial welding robotic arm
by: Syed Abdullah, Syed Idros, et al.
Published: (2011)

Fabrication of nickel aluminide intermetallic-alumina nanocomposite
by: Ismail, Roslina, et al.
Published: (2011)

Energy saving composite automotive brake rotor prototype
by: Maleque, Md. Abdul
Published: (2013)

Resistive switching of Cu/Cu2O junction fabricated using simple thermal oxidation at 423 K for memristor application
by: Ani, Mohd Hanafi, et al.
Published: (2018)

Advances in composite materials
Published: (2011)

Fabrication and characterization of poly (ethylene oxide) for photo-electronic devices
by: Alaei, Iraj, et al.
Published: (2015)

Protein foaming-consolidation method for fabrication of high performance porous bioceramics
by: Sopyan, Iis, et al.
Published: (2013)

Fabrication and sintering behavior of zinc-doped biphasic calcium phosphate bioceramics
by: Sopyan, Iis, et al.
Published: (2016)

Investigation on the effect of water immersion on cotton albumen composite
by: Halim, Zahurin, et al.
Published: (2011)

Mechanical properties of wood plastic composites
by: Ooi, Chong Jin, et al.
Published: (2011)

Automotive bottom structure composite materials selection: digital logic and knowledge based system approach
by: Maleque, Md. Abdul, et al.
Published: (2014)

Fabrication of nickel aluminide (Ni3Al) by hot isostatic pressing (HIP)
by: Abu Zarim, Faizal, et al.
Published: (2011)

Micro connector for high packaging density fabricated by using UV Thick Photoresist
by: Unno, Toshinori, et al.
Published: (2002)

Cannot write session to /tmp/vufind_sessions/sess_dtermbjt4m69ffdjm3jv2ga331