Wear characteristics of Fe-C-Si and Fe-C-Al cast irons
In order to study the wear properties of Fe-C-Si and Fe-C-Al alloy systems, castings were produced in resin bonded sand mould of suitable design, which provides information regarding various thicknesses of the castings. Gray cast iron is an inexpensive and readily available material used for manufac...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Trans Tech Publications, Switzerland
2011
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/1872/ http://irep.iium.edu.my/1872/ http://irep.iium.edu.my/1872/ http://irep.iium.edu.my/1872/1/Shaha%2C_Haque%2C_Ahsan.pdf |
| id |
iium-1872 |
|---|---|
| recordtype |
eprints |
| spelling |
iium-18722017-06-14T03:04:09Z http://irep.iium.edu.my/1872/ Wear characteristics of Fe-C-Si and Fe-C-Al cast irons Shaha, Sugrib Kumar Haque, Md. Mohafizul Khan, Ahsan Ali TS200 Metal manufactures. Metalworking In order to study the wear properties of Fe-C-Si and Fe-C-Al alloy systems, castings were produced in resin bonded sand mould of suitable design, which provides information regarding various thicknesses of the castings. Gray cast iron is an inexpensive and readily available material used for manufacturing of roller, roller shell, piston rings, cylinder liners, etc. Its low melting point is characterized as unique combination of superior properties like good friction and wear properties and economic in manufacturing. In the present study, wear behavior of the Fe-C-Si and Fe-C-Al cast irons were investigated using a pin-on-disk type apparatus at room temperature. Alumina ball of 3 mm diameter was used as pin, while the cast sample served as the disk. The tests were carried out at a normal load of 5.0 N and a sliding velocity of 250 mm/s for 30 min. The Fe-C-Al cast iron showed a wear rate of 3.3203×10-5 mm3/m/N compared to 12.42×10-5 mm3/m/N of Fe-C-Si cast iron. The worn surfaces were analyzed using optical profilometer and SEM. Trans Tech Publications, Switzerland 2011-06-30 Article PeerReviewed application/pdf en http://irep.iium.edu.my/1872/1/Shaha%2C_Haque%2C_Ahsan.pdf Shaha, Sugrib Kumar and Haque, Md. Mohafizul and Khan, Ahsan Ali (2011) Wear characteristics of Fe-C-Si and Fe-C-Al cast irons. Advanced Materials Research, 264-65. pp. 1928-1932. ISSN 1022-6680 http://www.scientific.net/AMR.264-265.1928 doi:10.4028/www.scientific.net/AMR.264-265.1928 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
International Islamic University Malaysia |
| building |
IIUM Repository |
| collection |
Online Access |
| language |
English |
| topic |
TS200 Metal manufactures. Metalworking |
| spellingShingle |
TS200 Metal manufactures. Metalworking Shaha, Sugrib Kumar Haque, Md. Mohafizul Khan, Ahsan Ali Wear characteristics of Fe-C-Si and Fe-C-Al cast irons |
| description |
In order to study the wear properties of Fe-C-Si and Fe-C-Al alloy systems, castings were produced in resin bonded sand mould of suitable design, which provides information regarding various thicknesses of the castings. Gray cast iron is an inexpensive and readily available material used for manufacturing of roller, roller shell, piston rings, cylinder liners, etc. Its low melting point
is characterized as unique combination of superior properties like good friction and wear properties and economic in manufacturing. In the present study, wear behavior of the Fe-C-Si and Fe-C-Al cast irons were investigated using a pin-on-disk type apparatus at room temperature. Alumina ball of 3 mm diameter was used as pin, while the cast sample served as the disk. The tests were carried out at a normal load of 5.0 N and a sliding velocity of 250 mm/s for 30 min. The Fe-C-Al cast iron
showed a wear rate of 3.3203×10-5 mm3/m/N compared to 12.42×10-5 mm3/m/N of Fe-C-Si cast iron. The worn surfaces were analyzed using optical profilometer and SEM. |
| format |
Article |
| author |
Shaha, Sugrib Kumar Haque, Md. Mohafizul Khan, Ahsan Ali |
| author_facet |
Shaha, Sugrib Kumar Haque, Md. Mohafizul Khan, Ahsan Ali |
| author_sort |
Shaha, Sugrib Kumar |
| title |
Wear characteristics of Fe-C-Si and Fe-C-Al cast irons |
| title_short |
Wear characteristics of Fe-C-Si and Fe-C-Al cast irons |
| title_full |
Wear characteristics of Fe-C-Si and Fe-C-Al cast irons |
| title_fullStr |
Wear characteristics of Fe-C-Si and Fe-C-Al cast irons |
| title_full_unstemmed |
Wear characteristics of Fe-C-Si and Fe-C-Al cast irons |
| title_sort |
wear characteristics of fe-c-si and fe-c-al cast irons |
| publisher |
Trans Tech Publications, Switzerland |
| publishDate |
2011 |
| url |
http://irep.iium.edu.my/1872/ http://irep.iium.edu.my/1872/ http://irep.iium.edu.my/1872/ http://irep.iium.edu.my/1872/1/Shaha%2C_Haque%2C_Ahsan.pdf |
| first_indexed |
2023-09-18T20:09:23Z |
| last_indexed |
2023-09-18T20:09:23Z |
| _version_ |
1777407375593963520 |