High speed cutting: an approach towards improved
machining performance

High speed cutting: an approach towards improved machining performance

Bibliographic Details
Other Authors:	Adesta, Erry Yulian Triblas
Format:	Book
Language:	English
Published:	IIUM Press 2011
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://irep.iium.edu.my/17741/ http://irep.iium.edu.my/17741/ http://irep.iium.edu.my/17741/1/Book.pdf

Similar Items

Coating for high speed cutting tools
by: -, Suryanto
Published: (2011)

Development of new model for cutting force in high speed hard turning
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2011)

New tool life models in turning hardened steel AISI 4340 under high cutting speed
by: Adesta, Erry Yulian Triblas, et al.
Published: (2011)

Surface integrity of titanium when machining with various cutting parameter
by: Mohd 'Azim, Ab. Halim
Published: (2010)

Process damping technique for aluminium alloy at low speed machining
by: Mohd Azfadir, Mat Daud
Published: (2012)

High speed end milling in mould and die making
by: Suprianto, Mohamad Yuhan, et al.
Published: (2011)

Influence of cutting parameters on cutting force and cutting temperature during pocketing operations
by: Hamidon, R., et al.
Published: (2016)

Development of tooling cost model in high speed hard turning
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2011)

Workpiece preheating approach to reduce chatter and improve machinability of titanium alloy- Ti6A14V
by: Nurul Amin, A.K.M, et al.
Published: (2011)

Efficiency of speed hump in reducing speed hump in reducing speed within higher educational institution area
by: Nur Munirah, Anuar
Published: (2018)

Using High Temperature for Improve Compressive Strength of Ordinary Portland Cement Paste (OPC) – A New Approach
by: Abdoullah, Namdar, et al.
Published: (2014)

Response surface methodological approach for the prediction of tangential cutting forces in end milling of stainless steel
by: Patwari, Muhammed Anayet Ullah, et al.
Published: (2008)

Taguchi approach on surface integrity of titanium in turning operation using tin coated cutting tool
by: Aida Azwa, A. Halim
Published: (2010)

Experimental Investigation On The Performance Of The Tio2 And Znohybrid Nanocoolant In Ethylene Glycol Mixture Towards AA6061-T6 Machining
by: N. S. M., Sahid, et al.
Published: (2017)

Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2011)

Machinability study of high thermal conductivity tool steel (HTSC-150 ) in hot press die
by: Ahmad Nur Zakwan, Ahmad Nazari
Published: (2013)

Improvement of machinability of hard to machine materials by cryogenic cooling and job preheating
by: Amin, A. K. M. Nurul, et al.
Published: (2009)

Development of empirical models for surface roughness during high speed turning for hard materials using Box-Behnken design
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2011)

Vehicle tracking and speed estimation system
by: Chan, Chia Yik
Published: (2012)

Chloride Permeability of Nanoclayed Ultra-High Performance Concrete
by: Mohd Faizal, Md Jaafar, et al.
Published: (2015)

Performance of High Strength POFA Concrete in Acidic Environment
by: Ahmed, Mokhtar Albshir Budiea, et al.
Published: (2010)

Chloride Permeability of Nanoclayed Ultra-High Performance Concrete
by: Mohd Faizal, Md Jaafar, et al.
Published: (2014)

The value of facade improvement towards building image
by: Mohammad Affendy, Omardin
Published: (2009)

Speed studies on Malaysia East Coast expressway
by: Wahyu Nur Susianna, Omar
Published: (2017)

A numerical evaluation on multi-interfaced fast handoff scheme: impact of rising link switching delay for a high speed car
by: Islam, Shayla, et al.
Published: (2016)

Durability performance of ultra-high performance concrete (UHPC) incorporating waste rubber powder
by: Syed Mohamad Arzmierull, Syed Nasruddin
Published: (2017)

Field-emission-assisted approach to dry micro-electro-discharge machining of carbon-nanotube forests
by: Saleh, Tanveer, et al.
Published: (2011)

Relationship between electrode size and machined surface in the EDM machining process
by: Mohd Azrul Aminur, Ismail
Published: (2008)

Strength Development of High Performance Concrete Utilising Micro Pofa
by: Wan Nur Firdaus, Wan Hassan, et al.
Published: (2018)

Performance of fly ash based geopolymer concrete at high temperature
by: Suhaimi , Ahmad
Published: (2013)

Strength and Chloride Content of Nanoclayed Ultra-High Performance Concrete
by: Mohd Faizal, Md Jaafar, et al.
Published: (2014)

In-situ measurement and formability improvement in stamping of high strength steel and titanium alloy sheets
by: Zamzuri, Hamedon
Published: (2014)

The durability performance of rubberized-ultra high performance concrete exposed in magnesium sulphate and hydrochloric acid
by: Muhamad Hariz, Ibrahim
Published: (2018)

Determination of target speed from the FMCW radar data
by: Sediono, Wahju, et al.
Published: (2011)

Chatter control in induction heat assisted end milling: to improve machinability of stainless steel and medium carbon steels
by: Amin, A. K. M. Nurul, et al.
Published: (2013)

Estimation and validation of wind speed by using spatial interpolation
by: Yap, Yee Von
Published: (2015)

Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process
by: Mohd Ali, Afifah, et al.
Published: (2011)

Relationship between machining parameters and surface roughness of brass using lathe machine.
by: Raja Mohd., Raja Idris
Published: (2008)

Study of machining parameters of surface roughness in electro discharge machining of tool steel
by: Zairul Ezree , Mohd Yunus
Published: (2008)

Chloride Resistance Behavior on Nano-Metaclayed Ultra-High Performance Concrete
by: Mohd Faizal, Md Jaafar, et al.
Published: (2017)

Cannot write session to /tmp/vufind_sessions/sess_uk1ecdcv269iot6ajsbu35d079