Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions

Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions

In this paper, the tool life and tool wear performance of PCBN tool in end milling of AISI D2 hardened steel under room and preheated machining conditions is presented. The tool life and tool wear patterns were examined through tool maker microscope and scanning electron microscope. The results show...

Full description

Bibliographic Details
Main Authors: Lajis, Mohd Amri, Amin, A. K. M. Nurul, Karim, A.N. Mustafizul, Ginta, Turnad Lenggo
Format: Article
Language:English
Published: Trans Tech Publications Ltd., Switzerland 2011
Subjects:
TS Manufactures
Online Access:http://irep.iium.edu.my/17277/
http://irep.iium.edu.my/17277/
http://irep.iium.edu.my/17277/
http://irep.iium.edu.my/17277/1/AMR.264-265.901.pdf
id iium-17277
recordtype eprints
spelling iium-172772012-01-28T15:03:18Z http://irep.iium.edu.my/17277/ Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions Lajis, Mohd Amri Amin, A. K. M. Nurul Karim, A.N. Mustafizul Ginta, Turnad Lenggo TS Manufactures In this paper, the tool life and tool wear performance of PCBN tool in end milling of AISI D2 hardened steel under room and preheated machining conditions is presented. The tool life and tool wear patterns were examined through tool maker microscope and scanning electron microscope. The results show that the dominant modes of tool wear observed were flank wear, chipping, and notch wear. The main wear mechanisms were abrasion, adhesion, and diffusion promoted by high stress and cutting temperature. It was also observed that longer tool life and higher volume metal removed could be achieved when employing higher preheating temperature. Trans Tech Publications Ltd., Switzerland 2011-06-30 Article PeerReviewed application/pdf en http://irep.iium.edu.my/17277/1/AMR.264-265.901.pdf Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2011) Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions. Advanced Materials Research, 264-65. pp. 901-906. ISSN 1662-8985 http://dx.doi.org/10.4028/www.scientific.net/AMR.264-265.901 doi:10.4028/www.scientific.net/AMR.264-265.901
repository_type Digital Repository
institution_category Local University
institution International Islamic University Malaysia
building IIUM Repository
collection Online Access
language English
topic TS Manufactures
spellingShingle TS Manufactures
Lajis, Mohd Amri
Amin, A. K. M. Nurul
Karim, A.N. Mustafizul
Ginta, Turnad Lenggo
Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions
description In this paper, the tool life and tool wear performance of PCBN tool in end milling of AISI D2 hardened steel under room and preheated machining conditions is presented. The tool life and tool wear patterns were examined through tool maker microscope and scanning electron microscope. The results show that the dominant modes of tool wear observed were flank wear, chipping, and notch wear. The main wear mechanisms were abrasion, adhesion, and diffusion promoted by high stress and cutting temperature. It was also observed that longer tool life and higher volume metal removed could be achieved when employing higher preheating temperature.
format Article
author Lajis, Mohd Amri
Amin, A. K. M. Nurul
Karim, A.N. Mustafizul
Ginta, Turnad Lenggo
author_facet Lajis, Mohd Amri
Amin, A. K. M. Nurul
Karim, A.N. Mustafizul
Ginta, Turnad Lenggo
author_sort Lajis, Mohd Amri
title Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions
title_short Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions
title_full Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions
title_fullStr Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions
title_full_unstemmed Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions
title_sort performance evaluation of pcbn in end milling of aisi d2 hardened steel under room and preheated machining conditions
publisher Trans Tech Publications Ltd., Switzerland
publishDate 2011
url http://irep.iium.edu.my/17277/
http://irep.iium.edu.my/17277/
http://irep.iium.edu.my/17277/
http://irep.iium.edu.my/17277/1/AMR.264-265.901.pdf
first_indexed 2023-09-18T20:26:06Z
last_indexed 2023-09-18T20:26:06Z
_version_ 1777408426695983104

Similar Items