Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V

Dynamic change in cutting force is one of the major causes of chatter formation in metal cutting which affect machining accuracy. Thus, accurate modeling of cutting force is necessary for the prediction of machining performance and determination of the mechanisms and machining parameters that affect...

Full description

Bibliographic Details
Main Authors:	Patwari, Muhammed Anayet Ullah, Amin, A. K. M. Nurul, Faris, Waleed Fekry
Format:	Conference or Workshop Item
Language:	English
Published:	2009
Subjects:	TS Manufactures
Online Access:	http://irep.iium.edu.my/17029/ http://irep.iium.edu.my/17029/ http://irep.iium.edu.my/17029/1/Paper_ID103.pdf

id	iium-17029
recordtype	eprints
spelling	iium-170292012-01-26T03:03:06Z http://irep.iium.edu.my/17029/ Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V Patwari, Muhammed Anayet Ullah Amin, A. K. M. Nurul Faris, Waleed Fekry TS Manufactures Dynamic change in cutting force is one of the major causes of chatter formation in metal cutting which affect machining accuracy. Thus, accurate modeling of cutting force is necessary for the prediction of machining performance and determination of the mechanisms and machining parameters that affect the stability of machining operations. The present paper discusses the development of a mathematical model for predicting the tangential cutting force produced in end-milling operation of Ti6Al4V. The mathematical model for cutting force prediction has been developed in terms of the input cutting parameters cutting speed, feed rate, and axial depth of cut using response surface methodology (RSM). Effects of all the individual cutting parameters on cutting force as well as their interactions are investigated in this study. Central composite design was employed in developing the cutting force model in relation to the primary cutting parameters. The experimental results indicate that the proposed mathematical models suggested could adequately describe the performance indicators within the limits of the factors that are being investigated. 2009-10 Conference or Workshop Item PeerReviewed application/pdf en http://irep.iium.edu.my/17029/1/Paper_ID103.pdf Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur. http://www.iium.edu.my/ampt2009/date.htm
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TS Manufactures
spellingShingle	TS Manufactures Patwari, Muhammed Anayet Ullah Amin, A. K. M. Nurul Faris, Waleed Fekry Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V
description	Dynamic change in cutting force is one of the major causes of chatter formation in metal cutting which affect machining accuracy. Thus, accurate modeling of cutting force is necessary for the prediction of machining performance and determination of the mechanisms and machining parameters that affect the stability of machining operations. The present paper discusses the development of a mathematical model for predicting the tangential cutting force produced in end-milling operation of Ti6Al4V. The mathematical model for cutting force prediction has been developed in terms of the input cutting parameters cutting speed, feed rate, and axial depth of cut using response surface methodology (RSM). Effects of all the individual cutting parameters on cutting force as well as their interactions are investigated in this study. Central composite design was employed in developing the cutting force model in relation to the primary cutting parameters. The experimental results indicate that the proposed mathematical models suggested could adequately describe the performance indicators within the limits of the factors that are being investigated.
format	Conference or Workshop Item
author	Patwari, Muhammed Anayet Ullah Amin, A. K. M. Nurul Faris, Waleed Fekry
author_facet	Patwari, Muhammed Anayet Ullah Amin, A. K. M. Nurul Faris, Waleed Fekry
author_sort	Patwari, Muhammed Anayet Ullah
title	Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V
title_short	Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V
title_full	Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V
title_fullStr	Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V
title_full_unstemmed	Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V
title_sort	statistical approach for the development of tangential cutting force model in end milling of ti6al4v
publishDate	2009
url	http://irep.iium.edu.my/17029/ http://irep.iium.edu.my/17029/ http://irep.iium.edu.my/17029/1/Paper_ID103.pdf
first_indexed	2023-09-18T20:25:50Z
last_indexed	2023-09-18T20:25:50Z
_version_	1777408409761480704

Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V

Similar Items